Most OnlineNewest Member
I have created a number of different wall types to show proper dimensions (i.e. when one side of the wall is 5/8" Type X and the other side is 1/2" drywall) as well as to calculate the correct material counts and to show the proper information in the schedules. Unfortunately doing that seems to have a down side...it changes the framing as if they were separate walls instead of the same wall with different materials on them. I have seen the following side effects (colors refer to screenshots below):
(Green Arrow) In unfinished rooms such as an attic storage space which only has a subfloor but no drywall, the walls get pushed up into the rafters by what appears to be 3". (Red Arrows) The floor joists and top/bottom plates are cut in the middle when they should be continuous pieces of wood. In addition, you can see that the walls which are produced are not boxed at the end...the top & bottom plates stick out at the end. (Purple Arrow) Parts of the gable wall are not created. In this case you could argue that it is not needed, but if a builder makes a wall he is not going to leave a hole in it. (Blue Arrows) An extra stud is added to a room that has no drywall, and therefore doesn't need nailer studs. In addition, it looks like the other stud needed as a nailer for the finished room in the middle is missing from the plan view of the framing (see 2nd screenshot).
Am I doing this all wrong (creating separate wall types), or is there a way to use them and fix (any of) the issues I mentioned?
Thanks in advance for any help!
PS - I am a little surprised that the wall finish is not part of the room settings (like the floor & ceiling already are)...that would allow you to have continuous walls and still have different materials in each room (i.e. greenboard in the bath, 5/8" type X in a garage, unfinished in an attic, etc.
Example of Wall Issue.plan
You've found it! A thread offering up some of my favorite symbols and content for Chief Architect X-11.
These items are for X-11 only. If you haven't updated yet I encourage you to do so, it's a great release.
The following content is listed by category with both a link to the post within this thread for easy navigation and a link to a direct download if you won't to cut straight to the chase. new/recent uploads are in RED font
CLICK ON THE "DL" FOR INSTANT .CALIBZ DOWNLOAD:
CONSTRUCTION ASSEMBLIES/ARCHITECTURAL ITEMS:
RABS 42 CABLE RAILING - DL RABS MODERN FRONT DOOR AND DOOR ASSEMBLY - DL RABS INTEGRATED SINK - DL NEW!!! 03/26/2020
RABS CHARLES-HILL GROUPED LIVING ROOM - DL RABS CHELTON GROUPED LIVING ROOM - DL ACCESSORY HOME #1 - DL ACCESSORY HOME #2 - DL ACCESSORY HOME #3 - DL
3-ISLANDS - DL LA CORNUE 1908 RANGE - DL CAFE APPLIANCES, PAINTABLE(CORRECTED) - DL
PENDANTS AND SCONCES - DL-1 - DL-2 - DL-3 - DL-4 RECESSED NC HALO 4 INCH LED WITH HOUSING - DL NEW!! 03-22-20
TILE AND COUNTERTOPS #1 - DL 1(ONEDRIVE LINK) - DL-2 CUSTOM WHITES WITH PAINT TOOLBAR ICONS - DL-1 - DL-2 - DL-3 - DL-4 - DL-5 - DL-6 RABS RUGS 1V1 - DL RABS STARTER KITCHEN MATERIALS PACK - DL RABS FLOORING PACK 1 - DL RABS OLD GOLDEN OAK FLOOR - DL
FIREPLACE ASSEMBLY 1 - DL ACKLES BED AND EDISON TABLE LAMP - DL-1 - DL - 2 TEAPOT MATERIAL EDITOR REPLACEMENT - DL-1 - DL-2 FINMARK TABLE FROM CB2 - DL FIREPLACE MANTLES 1 AND 2 - DL RABS STRETCHABLE PICTURE FRAMES - DL
Many of these I have personally made or modified. Some of the content may have been created by others for which I will give credit. Many of the materials have free licensing, so no credit is needed.
Some of this content may slow down your program as I have a high powered machine and often times use complex and high resolution textures. I will try and give as much detail as possible. Use at your own peril!
No but seriously dig through and enjoy, I've spent a good number of hours ensuring the quality of these symbols and will update them periodically- so CHECK BACK IN! and PLEASE GIVE A LIKE FOR THE POST OF ANY SYMBOL YOU LIKE, IT ENCOURAGES ME TO GO BACK AND REFINE/REDUCE/OPTIMIZE THAT SYMBOL. GIVE A DOWNVOTE AND IT'LL PROBABLY ENCOURAGE ME TO DO THE SAME THING...YOU'LL JUST BE A JERK FOR IT
02-12-2019- 4:45PM: Removed the poll, migrated this thread. re-uploaded from X11 public beta 02-20-2019-2:59PM: Added a Poll for user content requests 03-30-2020-6:49PM: Deleted Video Links and added link to YouTube Channel Post 5:
02-12-2019- 4:45PM: centered the hearth on the symbol Post 18:
02-12-2019-9:52PM: Posted and fixed DL links
Here is a symbol to get you started:
@Cheryl_C_Crane Think you requested this,
RUSTIC BRICK 2.calibz
Number of Textures: 2
Map size: 1024x1024
Filesize: 3.13 MB