K80Guy

Soffits Not Trimmed Flush

Recommended Posts

I have made almost every adjustment I can think of besides for drawing the soffits manually to get the soffit panel to sit inside the fly rafter underside.  Please look at the attached image and see if anyone has had this problem and / or knows how to rectify.

 

Thanks for the help.

 

 

post-519-0-30942000-1434911538_thumb.png

Share this post


Link to post
Share on other sites

Dennis, tried to box the soffit and adjust soffit heights.  CA will not go negative so 1/16" is the lowest I can go.  Adjusted size of box depth, no avail.

 

Here is the pic in 3d

post-519-0-67296600-1434912245_thumb.png

Share this post


Link to post
Share on other sites

Are your rafters and fascia set to the same size by chance? ie both 2 x 8

Share this post


Link to post
Share on other sites

Mick, yes they are.  I also re-built the roof real quick to see if resetting all the rafter heights made anything happen.

 

Nada!

 

Getting frustrated.

Share this post


Link to post
Share on other sites

They shouldn't be is what I meant sorry ,fascia should be one size larger than gable subfascia.

 

Did you use the. Edit all roof planes  Tool ?

 

Post the plan , if ,needed its easier to figure things out.

Share this post


Link to post
Share on other sites

Mick, good call.  The gable subfascia had to be 1 size smaller.  I went from 7 1/4 to 5 1/4 and it cleared right up.

 

Thanks for the kick in the head.

 

Cory

Share this post


Link to post
Share on other sites

Great... that is the only time I have seen that issue.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

  • Member Statistics

    27490
    Total Members
    6254
    Most Online
    JonBCamerata
    Newest Member
    JonBCamerata
    Joined