Cadwork22 Posted Thursday at 07:11 PM Share Posted Thursday at 07:11 PM I thought I'd save some time and ask on the forum instead of looking for hours for the right answer. I need a wall in the back to be flush with the roof see attached photo. Thanks in advance. Darren (2).zip Link to comment Share on other sites More sharing options...
Solution DBCooper Posted Thursday at 07:42 PM Solution Share Posted Thursday at 07:42 PM I think it is pretty easy to build that roof using the automatic roof tools. I set the auto roof to build at 5:12 and then set the pitch to 2:12 for the lower wall where the shed is. Need to set the side walls for the shed to "full gable" and the upper shed wall to "high shed". I also had to go into several of your rooms and tell them to have a roof over them (not sure why they were turned off). I then set the overhang on the end wall to a small value (like 1") and reset it to "default wall top". I also noticed that some of your second floor walls were not aligned with the walls on the first floor. 1 1 Link to comment Share on other sites More sharing options...
Cadwork22 Posted Thursday at 08:05 PM Author Share Posted Thursday at 08:05 PM Thanks as always Link to comment Share on other sites More sharing options...
basketballman Posted Thursday at 10:07 PM Share Posted Thursday at 10:07 PM Doing some research and trying it first will help you learn things on your own .. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now