30" SINGLE CABINET DOOR

[VixenPower]

I need to make a full height single cabinet door that is 30" wide

Chief splits it into 2 doors automatically.  Is there a way to stop this from happening?

 

Thank you,

Kat

[TeaTime]

Yep!

Open the cabinet, select the Door and change it from Auto Right to just Right

Auto Right means that it'll change to a double automatically at 24" (by defualt)

[DBCooper]

Vertically or horizontally?  Doesn't really matter since they are both easy.

 

If you have two doors vertically, and you only want one, just grab the top of the full height cabinet in a camera view and lower past the upper door.  This will remove the upper doors.  Then just raise it back up and you should only have one.

 

If you have a double door and you want a single, open the cabinet dialog, click on the door, then change the "item type" from "door -auto right" to "door right" or "door left".

 

[VixenPower]

Thank you all very much!  I knew there was a easy way.

[DBCooper]

Darn, Tea Time beat me to it.  I guess I need to type faster. 

 

One other thing though, in X15 (but probably not back in X12), there is a general cabinet default that let's you change the threshold for automatic double doors.  OOB, it is set to 24" but you can change it to whatever you want.  So if you never wanted any 30" cabinets with double doors, you could change this default.