JasonJFBdesign Posted May 11, 2022 Share Posted May 11, 2022 Hi All, the settings for these two verandah roofs are identical. however the one at the front is abou 500mm lower than the side roof. any suggestions as to why this may be. I can't get them to align. Link to comment Share on other sites More sharing options...
DavidJPotter Posted May 11, 2022 Share Posted May 11, 2022 If the baseline, fascia top are the same but out of symmetric alignment when you join the ridges then the Baseline location must be out of sync with the adjoining roof planes (baselines commonly are located on the outer edge of framing of the walls they bear on.) Check for that. DJP Link to comment Share on other sites More sharing options...
glennw Posted May 12, 2022 Share Posted May 12, 2022 To confirm that both roof planes are identical, select them both at the same time and open the dbx. Any different settings will have either No Change or a horizontal bar in the selection box (or whatever it is called). Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now