Angled Side Wall Cabinet

[BeachHouse1]

I need to make a cabinet that has angled side.  Included is a plan view.  If anyone knows where I can look at a video, or something, that would be really great. 

 

Thanks

[BeachHouse1]

Thanks Eric,

The outline of the wall cabinet is the part with the rectangular door on it's face.  

[Dermot]

Try this:

 - Open the Cabinet Specification dialog

 - Go to Box Construction panel

 - Set Corner Treatment to Clipped

 - Set the Corner Width to what you need

[MarkMc]

What Dermot said but if you want the clips as deep as you show you'll have to cheat the depth. For a standard depth wall cabinet the software limits with width/depth of the clip 4-1/2 for 12" deep and 4 5/8 for 13". I rarely see clips over 6" but it is possible to order those.

[BeachHouse1]

Hey Guys, 

Thanks for helping. 
I discovered a work around.  

In the first one we needed a cabinet with the sides having a total mitered side.
This was achieved by adding corner cabinets on both sides.  Next we removed the extra until it created a triangular cabinet. The only problem with this was the automatic crown molding would not work.  We added a polyline molding.

[BeachHouse1]

Version 2

Same process but in this one we left the cabinet length A little longer and added a thin cabinet to the face of the center cabinet and gave it two doors.

[BeachHouse1]

Version 3 is just a wall cabinet with the corners clipped.