ramseyatelier Posted September 20, 2018 Share Posted September 20, 2018 Hi, I'm relatively new to the program, I have done a few plans, but still getting used to everything. I am working in X10 Premier software. I am having an issue with floor levels. When I divide up a space with interior walls or room dividers, and want to make a adjacent room "sunken" with a negative floor elevation, the program is changing the floor of all the surrounding rooms too, not just the room that (is section off my walls or divider) I want at the lower elevation level. Is there something I am missing here? I have done this in prior plans, and never had this issue. Maybe a gliche? Any info would be helpful. Thank you Stacey Link to comment Share on other sites More sharing options...
Doug_N Posted September 20, 2018 Share Posted September 20, 2018 Could you post the plan file? I am sure that one of us can solve this. Link to comment Share on other sites More sharing options...
ramseyatelier Posted September 21, 2018 Author Share Posted September 21, 2018 Hi Doug, Here is my draft, still very rough, but here it is. The polyline solids with the wavy line fills are supposed to be water basins, like pools, baja shelves, etc. I need this areas to be lower levels than main floor elevation. Thanks so much for you help. Stacey Here is the dropbox link. Its said it was too big to put here on the forum. Link to comment Share on other sites More sharing options...
glennw Posted September 22, 2018 Share Posted September 22, 2018 Can you explain in more detail in what areas you want to drop the floor? What is preventing you from selecting the room and dropping the floor. Unrelated to the above, it looks like you should turn some snaps on as you have a lot of unaligned objects in the plan. Link to comment Share on other sites More sharing options...
Doug_N Posted September 22, 2018 Share Posted September 22, 2018 Sorry, Stacey, I can't see the link. Can you just post the filename.plan. Just that file. I should not be too big to post. Link to comment Share on other sites More sharing options...
Doug_N Posted September 22, 2018 Share Posted September 22, 2018 Also perhaps a couple of pictures of the problem area that you are referring to., Link to comment Share on other sites More sharing options...
Doug_N Posted September 22, 2018 Share Posted September 22, 2018 Is this what you meant? Link to comment Share on other sites More sharing options...
ramseyatelier Posted September 23, 2018 Author Share Posted September 23, 2018 Hi Doug! @Doug_M Thanks for helping me out. Someone here on the forum told me to strip my plan to make it a smaller size in order for it to load directly onto this forum. When I took all the fixtures, and architectural blocks out (some dowloaded from Sketchup library) from the plan to make smaller---the floors began to work again. I'm thinking one of those objects had a problem of some sort that make the whole plan buggy. I really appreciate your willingness to help out. Ill be in touch if there are any more issues that I cant seem to figure out! Thanks again!! Stacey Hi Doug! Thanks for helping me out. Someone here on the forum told me to strip my plan to make it a smaller size in order for it to load directly onto this forum. When I took all the fixtures, and architectural blocks out (some dowloaded from Sketchup library) from the plan to make smaller---the floors began to work again. I'm thinking one of those objects had a problem of some sort that make the whole plan buggy. I really appreciate your willingness to help out. Ill be in touch if there are any more issues that I cant seem to figure out! Thanks again!! Stacey Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now