DavidJPotter Posted August 12, 2018 Share Posted August 12, 2018 See attached imagte and attached plan file When I try to emulate a raised floor box window I get unwanted side wall artifacts using the box window tool. I have submitted a case report to Tech support but I thought I would also ask you guys if you have a workable solution. DJP Box Window Fail.zip Link to comment Share on other sites More sharing options...
glennw Posted August 12, 2018 Share Posted August 12, 2018 David, You don't get the wall remnants under the box window if you make it at lest 15" deep. This distance is correct for your wall types, but it does vary depending on the wall types 1 Link to comment Share on other sites More sharing options...
DavidJPotter Posted August 12, 2018 Author Share Posted August 12, 2018 Thanks Glenn, I will try that (that makes the box window the "wrong" depth but I will take it if it works. Hey, you are of course correct, my point is that improper depth is improper function and should be repaired if possible by Chief Inc. Thanks again, Glenn! DJP Link to comment Share on other sites More sharing options...
glennw Posted August 12, 2018 Share Posted August 12, 2018 David, I agree it needs a fix, I was just trying to get you out of trouble. I will have a play and see if I can figure out why it happens. I think the same situation came up way back with one of Scott's plans and there was a different solution. Link to comment Share on other sites More sharing options...
DavidJPotter Posted August 12, 2018 Author Share Posted August 12, 2018 2 minutes ago, glennw said: I agree it needs a fix, I was just trying to get you out of trouble. In fact, you did, again thank you. DJP Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now