cjanderson66

IT'S A DECENT VIDEO, BUT BOY DOES HE NEED SOME COMMUNICATION SKILLS. I BARELY LAST 2 MIN.

Yo TeaTime, I clicked on a window and created a line for a muntin on this window and then blocked it. Clicked the window and it does not show up at all. I looked at the Load Muntin help and that is what brought me to here.

I know that there are over 1300 toolbar buttons but can someone tell me where I can find the Load Muntin toolbar button. I have done a search and it does not show up at all and I cannot seem to find it anywhere. Where did you find it Michael? Dermot, I saw this being done on one of the Love shack drawings but did not see the Load Muntins button and it is not showing up when I pick my window...

I know that there are over 1300 toolbar buttons but can someone tell me where I can find the Load Muntin toolbar button. I have done a search and it does not show up at all and I cannot seem to find it anywhere.

Has anybody got any idea of how to do a recessed Baseboard detail like the one shown here. I have a contemporary style home and the client wants this as the base. I have no idea of how to show this to him in my renderings.

Thank you all for your help as I think that I have solved the problem.

Excellent I will give that a try

Yep this is it. How did you do it?

No more like a barrel vault at the bottom of a gable end wall...

How do I create an Arch in a gable end wall. I have a client who wants an Arch at the end of the porch. Do I have to do this with a shape in CAD and them paste it? If so then it is not part of the attic wall.

Well this just happened to me as well. I have WEbroot but that should not be the problem. I had to close the program through task manager and opened up the program again only to find that everything I had done this morning was not saved. Went to open up the auto archive and even that did not save the old info I had done. Checked my preferences and it is at save every 5 minutes. This is the first time this has happened just wondering if this is part of the problem with the new update to X14. Damn all that work I did this morning and now I need to retrace my steps again.

So I have had this client for sometime now and the delays have gotten out of hand. I need a constant income coming in so I had to take on additional clients. I told my client that I would have to delay their project due to the lack of response. They wrote back short and sweet that they wanted all the files pertaining to the project including emails, renderings and CAD files. Now don't get me wrong as this was a good project and I liked the clients but there were too many red flags continuing and I really didn't need or want this project any longer. Now the question is, Do I give them the plan and layout file only for them to realize that they will not work with any other designer unless they are using CA or are these the rights of mine and I don't send them at all? I don't want to spend my time and convert each sheet to a CAD file just to get them off my back. Oh what to do! Thoughts and input would be helpful.

Rene, do you think you can slow this down a bit and add some voice over for clarification. I had to watch it 10X just to get one portion of it. :-)

Ryan, Thank you for you expert advise. I knew it was something as simple as that and I just missed it. Chris

my address has changed and I want to update the existing layout sheets with a new template. How do I go about doing so? Anybody got any ideas of how to make this change.

I have a situation in which I am remodeling a house and the orientation of the house is not parallel with any of the lot lines. So I have setup the project so that the house is parallel up and down. My problem now is the client wants a shop/RV garage that would be parallel to the front property line. What would be the best way to start this portion? Should I create a new job and rotate the site so that the Shop is not parallel up and down. My problem is, this is in an HOA and they want to see how the shop would look like the main house. If I rotate the site I cannot rotate the main house. Do I make the main house a block and how do I do this? I have attached a copy of the site so you can see what I am talking about. New Castle site.pdf

I too am in the area and specialize in remodels. I am located in Middleton just down the road from Eagle.

I am and just that fact that you told me to merge was a great tip. Never used it but that is great and will try to do this more often. THx

Nice work Jonny! If you have Vectorworks then why are you on Chief? Do you use Chief as well. Love the way Concepts looks with your Design and wish I could have that same with Chief. Not going to get started on another program though.

I am not sure what is happening but my average file size is getting crazy high and is loading my system up with huge archive files that I am constantly having to remove. My average file size, and mind you these are pretty large projects, is between 85 to 150 MB. Does this seem pretty large to you guys? In addition I am finding that there is a huge lag time now and that I am constantly seeing that little rotating circle spinning and it is creating a big delay on my workload. Any suggestions? I would submit a plan but I can't go over 25 MB and these files are much larger than that. Another thing that is driving me crazy is, I go to change a material and I see more than five color:white (for example) and there is no way to purge those additional materials. There are multiple things associated and shouldn't it be associate by that one material without creating more than one. I just don't get it.

I am not sure what has happened but when I create a trey ceiling my vertical sides of the depth that I have called out are not showing. Am I missing something? I have tried turning on all the layers but that still does not fix it. I am having to create a molding around the perimeter of the trey celling to cover it up. Any thoughts?

Yes, tried that and that did not do the trick. Once again this was something that was in the side panel that Chief (I think just added in X12). It is not just for window, I saw him do it on flooring for all floors...