mkennedy2000

Such good information, thanks. FWIW, I am the builder, and my guys love key notes - I can often fit plana on 11x17 using keynotes and the small plans are so much more manageable in the field. And during sedign it is great to tabulate the reuslts of a meeting in the a note block, really helps the client and my self see all the issues we have touched on. During design I will sometimes use dated noteblocks.

At first glance that looks really great. I had given up on the plant schedule workaround, cuz I found it slightly cumbersome and less than intuitive. Your idea of filtering electrical schedules seems pretty interesting. Maybe I'll revisit this concept., thanks.

i invested some time in the plant schedules method, but in the end abandoned it, neutral benefit, limited to the single schedule so no notes for any other plans - foundation, framing, electrical. it would be really, really nice to be able to have a schedule or note block with a graphic showing the type or shape of the callout - cirlce, square, whatever. right now I have a note block and a callout, have to move them both when I want to adjust position. I like to have a note block or each plan as well as general notes. In fact I can use both a general notes and a plan notes block for each plan. It would be so great to have a library of notes that I could drop into plan and have report to a note block on that layer. I wouldn't mind making the same callout in elevation as in plan. Window removed and such like for a remodeling plan. It seems both super easy and a really important tool to be missing.

I sometimes think I'd like to have an index of all the details in a plan, much like the sheet index. I'm gonna tinker around with the browser view, which will at least let me browse a list of details, but it might be interesting to be able to publish it to the plan, so any thoughts or tips would be appreciated.

Funny, I just logged on to post a wish list item. I wish plan dimension could display a callout same as elevation dimensions display an elevation callout, that would be your grid tool.

I'm in, FRI-17, 11AM PST unless I hear differently..

Mark, did u ever do that online meeting? I'd love to sit in if its still in the works...

I have had insoluble PDF lineweight issues in the past - title block (on page zero) lineweights displaying and printing differently from one sheet to the next. Have you tried different PDF printers? Is it the same no matter which page you send the detail to? Are the details live? or plot lines? My live details never look right, I assume because I'm too lazy to learn how to adjust them. so I always use plot lines.

I just drew a 20x20 room, auto built a foundation using 12" square piers, set to big spacing so i just got 4. Each pier is 10' deep by 1' square, so 4 piers is 40 CF, the BOM reports 44.68 CY, almost seems they are adding +\-10% and mislabeling CF as CY.

wow, that's a pretty huge difference. Is there any other concrete in the model?

Wow, a lot of information on that construction plan. What other plans do you draw? For instance, is there a roof framing plan? And an electrical Plan? And I assume the "Elevation Key Notes" is a typo? I go back and forth with how much stuff to put on one plan, and on which plan.

Serendipity meets Eureka

But I love the deck above for the worlds fastest patio cover below, a real gem of a technique.

But the beams at the end are incorrect, which was my original question - I'm not challenged by drawing things quickly and wrong, I do that all the time. I'm trying to learn to draw things quickly and right

LOL Perry, but i want a sloped roof over the post and beam. Still and all, it looks like a really nice way to get a patio cover and I suppose its possible to tinker with a zero height or attic room as the deck room then a roof over that? I'm always a little leary of odd rooms with non default floor and ceiling heights - they sometimes cause me trouble later on in the plan. And I still think the porch railing tool ought to have a setting to extend the beam past the post.

TY for the vid Perry, nice approach. I agree with various that it's quicker to draw post and beam manually in most cases, thus submit that the automation is sub par. I guess its a low priority item, I'd rather see improvements to the auto roof since every house has a roof lol, tho I guess almost all of them have a covered porch also.

I'll hve to revisit the whole auto decj framing issue - I've struggled with a bit in the past, just glossed over it and forged ahead. Sounds like it might have some use though.

TY Scott, not what I wanted to hear but not a total surprise. Wish CA automation worked better.

and how to get the ends of the beams to project past the post? I use a railing, set to diplay as posts to beam above, but the terminal post is always flush with the end of the beam, a condition I rarely, if ever want to see or build.

okay, thanks guys, I'll complain and suggest...

Any tips for handling and manipulating materials regions? I find it difficult to get the "corners" right - see the orange lines in the attached thumbnail.

Okay, thanks so much for the time guys, gives me great directions to pursue. Thanks again

I wish I could just tell a cabinet that it was a blind corner, I don't want to hold the adjacent cabinet away some random distance, nor do I want to add a filler. It would be nice if the little perspective or elevation view showed the blind corner correctly. I'd like to be able to drop a stock farmhouse sink in a sink base, and likewise have it display correctly. (TY Joe for the Ikea sink, but I need a single basin). I almost never want my cabinets to use different material - kicks, frames, doors and so on should be the same - I'll reserve shelves and interiors, but on the whole, I wish all the materials changed at once, unless otherwise instructed. I struggle with countertops at farmhouse sinks. I wish I could put a toekick on a wall cabinet, often use them for shallow bases and have to label them all by hand, build toekicks, blah blah blah. I wish I had a back of the island tool, like a custom countertop perhaps? Or a wall region? I wish I had a better way to build chefs tables - I use millwork legs, p-solids fore the skirts. I wish countertops didnt have radiused corners, often confuse issues and makes resizing difficult. I wish modifications in compnonents were persistent, just cuz i change the cabient size by an inch doesn't mean I don't want the pullout tray I specced. Maybe let me insert a macro in the comments reflecting some aspect of the cabient spec in fact. So, any suggestion or beset\better practices would be very welcome.

Thanks Perry, clever.

Ty Perry, that vide reminds me - another small issue is verbose annotation and the lack of ability to wrap text...... How are you using macros in conjunction with notes?