Steve_Nyhof
-
Posts
1439 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by Steve_Nyhof
-
It's a new drawing and I only have the two roof planes which were auto generated from the defaults. Set to 7.25, generated to 3.5
-
When I set the roof structure thickness to 7.25, the roofs are still generated at 3.5 https://www.loom.com/share/58d662203eb545dfb7acf75239cde336 Thoughts? Thank you, Steve
-
So I learned from support that for winders to work, you need to make the space the stairs are in a room. I did not make the basement stairs yet so did not have a room. I added a few room divider walls and it works. FYI
-
Here is the final result and DBX options on each wall... https://www.loom.com/share/6161b2bb24194744b93497344a71fb02
-
Thank you! That makes perfect sense! Perfection!!
-
Here is what I have... https://www.loom.com/share/97a8d4d7d505469ea195b3c8a7459e08 I do have some issue with my winders, they are not working and have a support ticket open. That might be my issue. I will update once I get an answer to that. Thank you, Steve
-
Very ingenious, Yusuf!
- 38 replies
-
- 1
-
-
- spiral staircase
- curved stais
- (and 3 more)
-
Thank you!
-
Thank you! It cuts into the ceiling correctly, but still not following how you control the bottom to follow the stairs. Still trying. This is the other way where you manipulate the walls, but cuts the ceiling...
-
So I tested both left and right curved stairs, and mirrored them and I cannot get the winders to curve with the wall. I'm going to report this to support.
-
Ah! Thank you for looking into this. You know, they do offer left and right curved stairs. Maybe you are not meant to mirror a stairs if you decide to go the other direction. Not saying that is what I did, but now I want to check. Thank you for looking into this. I will report a bug if I confirm what you are saying.
-
No hurry, it is a holiday - have a good night! Thank you, Glenn 2009.zip
-
Well, either way, I like the walls and appreciate the help!!
-
Getting closer - just need to figure out the winders https://www.loom.com/share/c6dc7629518f4bada6e6389f88fe78b7 Happy Thanksgiving BTW!
-
So I see you are not using rails - ok, so working on editing grips
-
Yes, the other issue with stringers is that they cannot be sized to width.
-
Thank you, Sir! Here is what I have so far... https://www.loom.com/share/56a3326a09954a71a4367d0a52f89a13
-
I'm not having such good luck - LOL - still working at it
-
Very nice! So this is done with walls?! Would you please share your file?
-
That worked!! Thank you!! It seems that X13 is global and no longer per session.
-
I looked into Preferences and Defaults and cannot find anything related. Not sure what to really look for either. It happens on all plans in X13 - new plan and old I just went back to X12 and tested and that gives me the popup
-
I thought it should be based on the session, but this happened months ago and has remained.
-
In this video at 14:30 the presenter shows how he makes a copy of the solid, adjusts it and then subtracts the one from the other. All looks straight forward. However, some time ago when I did this, I had a popup come up when I did not read, I only checked the box and closed it. Doing so changed things and now I am always left with the solid that I want to remove. I end up having to delete the main (makes a copy some how) and delete the solid I want to subtract. Here is my result... https://www.loom.com/share/09256a327b46425d901075f05289dd5b My question is, where do I turn that popup back on, in some way get back to having it work as shown in this video? Thank you, Steve
-
Here is my results... https://www.loom.com/share/31e3e5d00b7c4ccf930685a6197bdc31 Not shown in the video is that I did edit other details as well. See Yusufs' example .plan above for full DBX details. Thank you!
-
Thank you gentlemen! I just sat down to give this a try.
