ACADuser

What archives are you referring to? Ones you saved or CA saved?

OK, I see, but the current version never has a version number in the file name. I can probably live with that. Thanks

When I send a PDF file plan to the client I would normally save any future changes to a file with a new revision number. But when I do that the Layout file is no longer linked to that plan file. I have been saving a new layout file with that same revision number. How you you keep the files in sync?

Yes Joe that is what I expected CA to provide seeing how automated the software is supposed to be. Thanks Tommy that will be my last step. But in the design phase the stairs keep moving so to speak. I added a closet under the first floor stair & now every time I mess with the stair they jump inside the closet & I have to reposition them. PITA, can I turn that off? Problem with plan view is stair from 2nd to 3rd floor is longer than 1st floor stair. So in plan view of the 2nd floor the top of the stair covers the 2nd floor landing & confuses everyone who looks at it.

Thanks for the tip. The dimensions are critical and I have had to move them at least 3 times due to changes in the room layouts. When they stop moving I will need to create a presentation set with part of each flight showing on the 2nd floor. For now I changes the 2nd floor stair layer name so I can toggle it off & on. So there is no stair schedule or table to show rise/run & number of treads?

Thanks for the pointer. It is not as easy as it looks! MacDill TH-2UnitA.plan

I saw a video explaining how to show part of the stair from the second floor & part from the first floor & now that I need it, where has it gone? Also I want to put text with the stair data, rise run ets., in the section view. Is there a stair table to be used? Thanks

OK got it by deleting the CMU partition wall again & re drawing it. Thanks Looks like the copy & past, hold position may have caused the problem. Not sure. All is well now.

Plan would not upload and jZip will not zip it. I will restart my computer.

In the attached plan I created the floors with the auto floor tool & added walls to the first floor. Wanting the elevator / Lift to be exact I copied the first floor along with the CMU partition wall. Then went to floor 2 & 3 & used paste, hold position. Then the ceiling heights needed to be changed so I use Floor Defaults to change the heights. At this point I added stairs. For some reason the ROOM is not recognizing the wall so the 2nd floor is one big room. On the 2 & 3 floor I deleted the CMU partition & redrew it. That fixed floor 3 but floor 2 is still one large room. How to fix this ?

Thanks, that did the trick.

Using default values to create floors 1,2,& 3 I now found out they want different ceiling heights on each floor. Can I change the entire floor ceiling height? (without selecting each room & changing one by one)

Larry, that's a heart breaker! Did you move your entire C drive to the SSD? & Chief resides on it? I read something about moving Windows Cash file to the SSD as well but that may be automatic. I'll see if I can find that info.

So there is a way to use common names through the plant chooser. Open the plant chooser & enter the common name. Click the COMMON radio button & a list of matches populate the pick list. Highlight one and click the VIEW button below another window pops up with the display of the plant. If it is 2D it will indicate that in the dialog, if 3D the dialog will be dimmed and not say 2D. I think this is correct.

Thanks Jim, I too am stuck with one foot in ACAD & the other in CA.

Thanks, the Aerial View is somewhat useful. Although not for all commands. The help says: • No matter what tool is active, when you move the pointer to the Aerial View window and drag a marquee, the floor plan view zooms in on that area. But for some CAD tools it is not operable. Looks like dragging an object doesn't work. God I miss Autocad. To me this is a clumsy environment to draw in.

I agree, talk about user UN-friendly.

Always informative Steve. Thanks

Yes that paints a different story.

For those concerned with the SATA II versus the STA III take a look at this http://www.tomshardware.com/reviews/ssd-upgrade-sata-3gbps,3469.html I'm still looking for a better price on the 850 Pro 512gb but am close to a purchase. My video card is the weak link in my old system, but I may wait on that until I get a new computer.

Many thanks. It's easy once you know how. Now if I can jut remember for next time.

Here is a test plan WallTest.plan

Walls will not break but pulling then apart I made a short 8" thick wall out from the intersection & then moved it into place.

Your walls are too far apart. The north south walls share the framing line. i.e. no drywall.

When you do that it creates a notch at the cabinet side of the junction.