glennw

Several ways I can think of off hand.

Firstly, there are many line styles in the library.

You can create your own line styles:

You can use a Distribution Line and attach 2D cad blocks or 3D symbols to it:

First off, before I have another look...

To draw a full 180deg barrel vaulted ceiling it is better to draw it using zero degrees for the Pitch.

This way it is just the one curved ceiling plane for the full barrel instead of using two curved ceilings.

You need to have  look at some of the structure of your ceiling planes (framing layers, etc)

You can then use Join Roof Planes to join the 2 roof planes.

I would start by only having the Blocks Running layers as the Main Layer.

There are a couple of other settings that could be coming into play as well.

It might make it easier if you post a plan so that we can test it out.

When you Lock Toolbars, the toolbars move slightly because the little 3 dot grip thingy at the left hand side of the toolbar title disappears and the toolbars move to the left to make up for the lost space.

Lock Toolbars shouldn't reconfigure or change the order of any of your toolbars. 

57 minutes ago, DBCooper said:

Your "selection line" color in your preferences could be white or fully transparent.

...or the Selection Line color could be the same as your Background color.

If these 2 colors are the same, you will not see the door placement preview and when you select a wall, the dimensions will disappear. 

Go to Preferences and make them different colors.

Are you using auto or manual bay window and roof planes?

Does the bay have short return walls either side or there only 3 walls forming the bay?

I assume the side walls are at 45deg?

Do the roofs have to meet at the same apex point?

Just as a starting point tip though - you can use a negative number for the Curved Roof>Radius To Framing Top to achieve the concave curve. 

Here is a quick example:

You lost me!

As Chopsaw said - you are overthinking it.

It is really pretty simple but you seem to be making it really complicated.

Do you know what a contour line is?

A line that joins points of equal height.

Google contour lines if you need clarification.

So...all you need to basically do is draw contours using the Elevation Lines - forget Elevation Points.

Drawing retaining walls, flat areas etc, come in the second lesson.

George,

I just had another good look at the detail you posted and noticed that your winder stairs do come to a point.

I know you have finished, but it looks like winder stair method would be suitable (as opposed to the landing method).

Which method did you end up using? 

If you need exactly that, then I think that you will have to use landings.

The problem will be the separation between the flights and the meeting point between all the landings.

The winders (or landings) show odd shape at their narrowest point which you will only get with custom landings.

Chief stairs will only join the winders to a point or if you want a separation between the flights, it will be rounded, not square as shown.

I can't help without more information.

Ah...are you using the U shaped stair tool?

As I said, that only gives you 4 landings - not a stair.

The way I describe above gives you 6 winder stair treads

Give me your phone number and I will give you a call.

What are you doing and what trouble are you having with the winders?

I assume it is the 6 winders that you are having trouble with?

You can use the U shaped stair dbx, but that creates landings for the treads.

Or you can start with a curved stair, but I think the following way is the easiest.

Start by drawing an enclosed room the size of your stairs - you need to enclose the stairs so that the Winders have walls to extend to.

Draw a straight section of stairs with about 4 treads (or you can start with a curved stair).

Select it and use the end drag handle plus the Ctrl key to drag the end of the stairs around so they become curved and the start and end are co-planer.

You may need to relocate the stairs and change the centre radius, etc, to clean things up.

Open the dbx and lock the number of treads at 6 and check Winders.

Add the straight sections as required. 

Use Elevation Lines (not Elevation Points) that define the "constant elevations".

ie, lines that are level - same as contour lines.

I don't understand why you would do anything else.

It sounds like you are trying to relate the ground slope to your site boundaries - they are two independent things.

Ignore the site shape when drawing your Elevation Lines.

It sounds like you are talking about for 3D views.

This is from a post of mine from a while back.

Post the plan

You can't build rooms on an Attic floor.

You need to create another floor to build rooms.

I think the errant walls showing through is caused by the wall definitions.

Check your wall definitions - particularly the Main Layer/Exterior Layer settings.

Have a look in the help file.

• Quote

  Check No Room Definition to display the wall in floor plan and/or 3D views but not create room definition. This box is checked and inactive when the selected wall is set to be a Furred Wall on the Structure panel. See Room Definition.

   

This has already been explained in several of the above posts.

Probably better to post the plan and ask the question here.

DBCooper didn't explain how, so.....

It is very quick and easy.

Once you have your solid cylinder you can use Fillet Lines and then Fillet Edges (on the Edit toolbar) to radius the edges (top and/or bottom).

I would be extremely surprised if there is a behaviour difference between HD and Chief.

Are any of your walls (including invisible walls) marked as No Room Definition in the Wall Specification dbx?

On 9/28/2023 at 1:24 AM, mscpbd said:

 

Thanks everyone! It's not the first time I've run into this, and when you do flip the plan, if you add new text it adds it upside down! I wish there was a way that we could tell the program that  THIS wall will be the new front and everything will know to orient to the new angle.

 

It sounds to me like you may have used Rotate Plan View which really doesn't rotate the plan - it rotates the drawing sheet.

This may have some unintended and unwanted results like rotating the coordinate system and snap and reference grids.

Have a look in the help file.

1) Use an End To End dimension which will only give you one dimension string.

2) Point To Point dimensions place a point (if it doesn't snap to something else) and then attach the dimension to the point.

To move the dimension, you need to move the point and the dimension will follow

Select the cad filled box and then shift select it again, convert to block and save to library.

4 hours ago, Chopsaw said:

Perhaps put in a request for the option to use a cad block from the library that has unlimited options. 

Chopsaw,

We can already do this .......and then save it as part of a default set.

This is just a filled polygon, saved to the library and used as an arrow.

This then means that it is the default for each arrow drawn.