Recommended Posts

Hi Everyone

 

I have been trying for a while to come up with a way to create this type of "rotated" molding line for half wall Paneling (Hampton style)

 

Now that I have figured it out I thought I'd help out by sharing my little Library

 

Hope you enjoy it as much as i do.

 

Stay posted as I plan on adding to the different style of panelling

 

enjoy :) 

post-6857-0-04868800-1444180215_thumb.jpg

Hamptons style Wall Cladding.calibz

  • Upvote 1

Share this post


Link to post
Share on other sites

Hi Kelly

thanks for posting the cladding. I'm a new user to Chief Architect which I discovered only by accident having previously used Sketchup for my basic designs.

I have downloaded your cladding library which I'm most grateful for as I searched all through the default libraries without success :(  So Happy now haha.

I want to now apply the cladding as a new wall component along with the Framing, Builders Paper, Insulation & Plasterboard but am stumped on how to do so.

I'm using X8 btw.

Your library was imported automatically into the User Catalog and while it appears to recognise and permit dragging and dropping onto my floor plan showing the + symbol, I can't see where it actually applies it!! I have also tried using the 3D>Material Painter>Material Painter Component Mode (which works perfectly from with the Core Catalogs) but cannot use it from within the User Library :(

Wonder if you (or anyone else) can help perhaps

Yours 'Frustratingly'

Phil

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

  • Member Statistics

    27636
    Total Members
    6254
    Most Online
    Treasuretree
    Newest Member
    Treasuretree
    Joined
  • Similar Content

    • By Renerabbitt
      POST 0
       
      You've found it! A thread offering up some of my favorite symbols and content for Chief Architect X-11.
      These items are for X-11 only. If you haven't updated yet I encourage you to do so, it's a great release.
      The following content is listed by category with both a link to the post within this thread for easy navigation and a link to a direct download if you won't to cut straight to the chase. new/recent uploads are in RED font
      CLICK ON THE "DL" FOR INSTANT .CALIBZ DOWNLOAD:

       
      CONSTRUCTION ASSEMBLIES/ARCHITECTURAL ITEMS:
      RABS 42 CABLE RAILING - DL    RABS MODERN FRONT DOOR AND DOOR ASSEMBLY - DL   RABS INTEGRATED SINK - DL NEW!!! 03/26/2020  
      ENTOURAGE:
      RABS CHARLES-HILL GROUPED LIVING ROOM - DL RABS CHELTON GROUPED LIVING ROOM - DL    ACCESSORY HOME #1 - DL ACCESSORY HOME #2 - DL ACCESSORY HOME #3 - DL  
      KITCHEN RELATED:
      3-ISLANDS - DL LA CORNUE 1908 RANGE - DL CAFE APPLIANCES, PAINTABLE(CORRECTED) - DL  
      LIGHTING:
      PENDANTS AND SCONCES - DL-1 - DL-2 - DL-3 - DL-4 RECESSED NC HALO 4 INCH LED WITH HOUSING - DL NEW!! 03-22-20  
      MATERIALS:
      TILE AND COUNTERTOPS #1 - DL 1(ONEDRIVE LINK) - DL-2 CUSTOM WHITES WITH PAINT TOOLBAR ICONS - DL-1 - DL-2 - DL-3 - DL-4 - DL-5 - DL-6 RABS RUGS 1V1 - DL          RABS STARTER KITCHEN MATERIALS PACK - DL         RABS FLOORING PACK 1 - DL            RABS OLD GOLDEN OAK FLOOR - DL     
      SYMBOLS:
      FIREPLACE ASSEMBLY 1 - DL     ACKLES BED AND EDISON TABLE LAMP - DL-1 - DL - 2 TEAPOT MATERIAL EDITOR REPLACEMENT - DL-1 - DL-2 FINMARK TABLE FROM CB2 - DL FIREPLACE MANTLES 1 AND 2 - DL    RABS STRETCHABLE PICTURE FRAMES - DL     
       
      VIDEOS: 
      YouTube Channel  
      Many of these I have personally made or modified. Some of the content may have been created by others for which I will give credit. Many of the materials have free licensing, so no credit is needed. 
      Some of this content may slow down your program as I have a high powered machine and often times use complex and high resolution textures. I will try and give as much detail as possible. Use at your own peril!
       
      No but seriously dig through and enjoy, I've spent a good number of hours ensuring the quality of these symbols and will update them periodically- so CHECK BACK IN! and PLEASE GIVE A LIKE FOR THE POST OF ANY SYMBOL YOU LIKE, IT ENCOURAGES ME TO GO BACK AND REFINE/REDUCE/OPTIMIZE THAT SYMBOL. GIVE A DOWNVOTE AND IT'LL PROBABLY ENCOURAGE ME TO DO THE SAME THING...YOU'LL JUST BE A JERK FOR IT
       
      CHANGELOG:(PACIFIC TZ)
      Page 1:
        Post 0:
      02-12-2019- 4:45PM: Removed the poll, migrated this thread. re-uploaded from X11 public beta 02-20-2019-2:59PM: Added a Poll for user content requests 03-30-2020-6:49PM: Deleted Video Links and added link to YouTube Channel   Post 5:
      02-12-2019- 4:45PM: centered the hearth on the symbol   Post 18:
      02-12-2019-9:52PM: Posted and fixed DL links  
       
       
       
       
      Here is a symbol to get you started:
      @Cheryl_C_Crane Think you requested this,
       
      RUSTIC BRICK 2.calibz
      Number of Textures: 2
      Map size: 1024x1024
      Filesize: 3.13 MB

       
       
    • By RussellHouse
      I am using Windows 10 and Version X11.  I am trying to use an interior wall with brick on both sides. When I go to 3D the interior brick changes the interior part of the exterior wall from white pine to brick.  how can I keep the interior separate from the exterior
    • By ChiefuserDRB
      I am having an issue with the Library Browser where even when the top left Icon and in the view tab icon is show with a check mark to indicate being open but there is no sign of the Library Browser actually popping up on my screen or right sidebar, next to the Project Browser, as I have used it before. Has anyone else had this issue? Am I missing a setting that would hide the Library Browser or does this sound like a glitch/issue?
    • By JGSpruell
      Chief Architect + Lumion + Photoshop
    • By SNestor
      Is there anything I can do to either reduce or eliminate the lines the column moldings are producing in vector view?  I did convert the curve to a polyline...and divided the circle into very small parts...but it doesn't seem to help.  
       
      Any ideas would by great.  Thanks.
       
      Here's a couple pics...a sample plan is attached also. (Column Molding in Vector View.plan)