JenniZ Posted March 9, 2015 Share Posted March 9, 2015 I am trying to create a panel for the side of and island that extends back past the cabinet. I took a base cabinet and adjusted the dimension and made it 3/4" deep. It looks fine in the plan view but if I do an elevation or camera view it is showing the case and door and looks like a 1 1/2" panel. how do I remedy this so it is consistent in each view? Thanks! Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted March 9, 2015 Share Posted March 9, 2015 You can just place a door panel from the library in the plan and then size & move as required. Do this when I need the door paneled gable to extend flush with the actual fronts of the cabinets. Graham Link to comment Share on other sites More sharing options...
4hotshoez Posted March 9, 2015 Share Posted March 9, 2015 A full overlay door or any thing that is not an inset door is not shown in plan and will add the thickness of the door to the face of the cabinet. An inset door will be flush with the frame, but both will look the same in plan. Not sure if this is your situation. Link to comment Share on other sites More sharing options...
JenniZ Posted March 9, 2015 Author Share Posted March 9, 2015 So I just changed what I already had to a flush inset door and set the separations to 0 and it worked really well. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now