Rander91 Posted January 25, 2023 Share Posted January 25, 2023 Hello everyone, I am having an issue with an attic wall not generating, how do I go about continuing the back porch attic wall to continue to where the roof planes over the house meet? I've always had issues with roofs for some reason, so any help would be greatly appreciated! Attic Wall Missing.zip Link to comment Share on other sites More sharing options...
DavidJPotter Posted January 25, 2023 Share Posted January 25, 2023 Toggle up to the <A> attic level, turn on the "Reference Display" that shows you where the first floor walls are, then manually extend the attic wall that is too short. This is what you do also for missing attic walls-you manually draw them in. DJP Link to comment Share on other sites More sharing options...
Solution Alaskan_Son Posted January 25, 2023 Solution Share Posted January 25, 2023 In this particular instance, it looks like you need to drag out an extra Attic Wall section on Floor 2 and set to Roof Cuts Wall at Bottom (Roof tab): NOTE: It actually requires 2 attic walls because of the intersection with the pantry walls but you should be able to drag out a single wall. The break should occur automatically. Just make sure both walls have the correct settings. Link to comment Share on other sites More sharing options...
Rander91 Posted January 25, 2023 Author Share Posted January 25, 2023 2 minutes ago, Alaskan_Son said: In this particular instance, it looks like you need to drag out an extra Attic Wall section on Floor 2 and set to Roof Cuts Wall at Bottom (Roof tab): NOTE: It actually requires 2 attic walls because of the intersection with the pantry walls but you should be able to drag out a single wall. The break should occur automatically. Just make sure both walls are set correctly. Thank you! Link to comment Share on other sites More sharing options...
Chief_user_John Posted October 23 Share Posted October 23 I actually did that initially, to no avail. I tried it again, but made the extended attic wall the same size as the dutch gable and it worked. It turns out you can't overextend the attic wall PAST the dutch gable or it won't work. Seems kind of counter intuitive. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now