DHerb2014 Posted March 9, 2019 Share Posted March 9, 2019 I'm using X11 (or X10) and am having difficulty with trying to make a "floating bathroom cabinet"? I've tried everything and not sure how you would do this? Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted March 9, 2019 Share Posted March 9, 2019 Just open the cabinet DBX and under the General tab change Finished Floor to Bottom the height you wish to raise it. Link to comment Share on other sites More sharing options...
DHerb2014 Posted March 9, 2019 Author Share Posted March 9, 2019 Graham, I'm not having any luck with the setting you recommend. Please see attachment. There is something in the back of the cab that does not allow for removal? Not sure how to get rid of it Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted March 9, 2019 Share Posted March 9, 2019 On 3/9/2019 at 10:23 PM, DHerb2014 said: Graham, I'm not having any luck with the setting you recommend. Please see attachment. There is something in the back of the cab that does not allow for removal? Not sure how to get rid of it Expand Looks like the Toe Kick. Change it to "0" and adjust your cabinet height. Link to comment Share on other sites More sharing options...
DHerb2014 Posted March 9, 2019 Author Share Posted March 9, 2019 I'm thinking it might be something to do with X11 and eliminating the toe kick? Here's a standard front in X10 and another with bow front in X10. The bow front has something on right side running all way down to floor? I tried X11 with standard face and the vertical "fin" still shows up. I'll upload the plan file for review and comment Link to comment Share on other sites More sharing options...
DHerb2014 Posted March 9, 2019 Author Share Posted March 9, 2019 Here's X11 standard and bow front cabs - both have the vertical fin Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted March 9, 2019 Share Posted March 9, 2019 On 3/9/2019 at 10:51 PM, DHerb2014 said: I'm thinking it might be something to do with X11 and eliminating the toe kick? Here's a standard front in X10 and another with bow front in X10. The bow front has something on right side running all way down to floor? I tried X11 with standard face and the vertical "fin" still shows up. I'll upload the plan file for review and comment Expand I just raised one in X11 and had no issues. You need to post the plan. Link to comment Share on other sites More sharing options...
DHerb2014 Posted March 9, 2019 Author Share Posted March 9, 2019 Here's the plan file in X11 X11_test_plan_for_Chief_Users.plan Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted March 9, 2019 Share Posted March 9, 2019 On 3/9/2019 at 10:57 PM, DHerb2014 said: Here's the plan file in X11 X11_test_plan_for_Chief_Users.planFetching info... Expand You need to delete the toe kick as in my first post. Link to comment Share on other sites More sharing options...
DHerb2014 Posted March 9, 2019 Author Share Posted March 9, 2019 Please see attachment on toe kick set at "0" for both settings. Mine is not working like yours? Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted March 9, 2019 Share Posted March 9, 2019 On 3/9/2019 at 11:06 PM, DHerb2014 said: Please see attachment on toe kick set at "0" for both settings. Mine is not working like yours? Expand No you have to raise the Finished Floor Bottom up 12 inches for it to float. Link to comment Share on other sites More sharing options...
DHerb2014 Posted March 9, 2019 Author Share Posted March 9, 2019 Thank you guys! Eric, I reviewed all of your settings and it worked. I'm going to post a separate thread on Raytracing with X11 as I'm getting an error message after updating driver Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted March 9, 2019 Share Posted March 9, 2019 On 3/9/2019 at 11:21 PM, DHerb2014 said: Raytracing with X11 as I'm getting an error message after updating driver Expand Just roll-back the driver to your previous one. Not all new drivers are bug free. Link to comment Share on other sites More sharing options...
DHerb2014 Posted March 9, 2019 Author Share Posted March 9, 2019 I tried using my regular driver that I've been using for X10 without any problems. I tried it with X11 and got an error message. I asked Dan Bauman about it and he suggested upgrading the driver, which I did. Still got the error message and won't allow me to Raytrace? Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted March 9, 2019 Share Posted March 9, 2019 On 3/9/2019 at 11:25 PM, DHerb2014 said: I tried using my regular driver that I've been using for X10 without any problems. I tried it with X11 and got an error message. I asked Dan Bauman about it and he suggested upgrading the driver, which I did. Still got the error message and won't allow me to Raytrace? Expand What is the driver version you are having problems with? Link to comment Share on other sites More sharing options...
DHerb2014 Posted March 9, 2019 Author Share Posted March 9, 2019 Graham, it's 24.21.13.9924 driver date 9/5/2018; file version 2.1 NVIDIA Build_224; NVIDIA GeForce GTX 1070 Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted March 9, 2019 Share Posted March 9, 2019 On 3/9/2019 at 11:32 PM, DHerb2014 said: Graham, it's 24.21.13.9924 driver date 9/5/2018; file version 2.1 NVIDIA Build_224; NVIDIA GeForce GTX 1070 Expand That's the same one as I have, haven't encountered any problems. Post a plan that you are having the problem with, maybe it's one of your settings. Link to comment Share on other sites More sharing options...
DHerb2014 Posted March 10, 2019 Author Share Posted March 10, 2019 Here's the plan that will not allow Raytracing Chief_Test_Plan.plan Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted March 10, 2019 Share Posted March 10, 2019 On 3/10/2019 at 12:00 AM, DHerb2014 said: Here's the plan that will not allow Raytracing Chief_Test_Plan.planFetching info... Expand There is something wrong with that file. I reloaded the one you posted before and it is Ray Tracing just fine. Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted March 10, 2019 Share Posted March 10, 2019 Here's the Ray Trace after 14 passes. Link to comment Share on other sites More sharing options...
DHerb2014 Posted March 10, 2019 Author Share Posted March 10, 2019 Bizarre...I'm going to quit X11 and reboot to see if it clears it out, then reload the test plan file Link to comment Share on other sites More sharing options...
DHerb2014 Posted March 10, 2019 Author Share Posted March 10, 2019 Same thing after rebooting. I was just rendering on X10 with a different plan file, and it made 2 passes without any problem. I think I may have a buggy version of X11. Am thinking of uninstalling X11 and downloading another version again. Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted March 10, 2019 Share Posted March 10, 2019 On 3/10/2019 at 12:27 AM, DHerb2014 said: Same thing after rebooting. I was just rendering on X10 with a different plan file, and it made 2 passes without any problem. I think I may have a buggy version of X11. Am thinking of uninstalling X11 and downloading another version again. Expand Try another(different) plan file before going through the process of reloading X11. Since I was able to run the first one you posted just go to your post and download it as a test. Link to comment Share on other sites More sharing options...
DHerb2014 Posted March 10, 2019 Author Share Posted March 10, 2019 Loaded another plan file and tried Raytrace. It keeps giving the Windows 10 "spinning blue doughnut" and then the error message. Going to delete this version of X11 and start over Link to comment Share on other sites More sharing options...
DHerb2014 Posted March 10, 2019 Author Share Posted March 10, 2019 After removing the old version of X11, I downloaded another version from CA, and it's working perfectly now! Many thanks for all of the comments and help Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now