jonboy Posted January 12, 2017 Share Posted January 12, 2017 Does anyone know if it is possible to turn the sun shadows off when doing a top down ray trace.. it's kick my x9 Thanks Link to comment Share on other sites More sharing options...
JasonParsons Posted January 12, 2017 Share Posted January 12, 2017 Toggle off sunlight, turn off shadows for all your lights, up the ambient settings in the 3D options 1 Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted January 12, 2017 Share Posted January 12, 2017 An alternative is to set the Direct Sunlight intensity to "0" in the Raytrace DBX. You can also set this to a very low setting if you desire some shadow effect without it being to over powering. Graham 1 Link to comment Share on other sites More sharing options...
jonboy Posted January 12, 2017 Author Share Posted January 12, 2017 Either way still turns out with either shadows or to dark ... tried Direct sunlight intensity at 1 or 0 then that dark Turn off the sunlight then is to dark ... Tried with sunlight off and direct sunlight at 4 still dark Nothing seam to work in turning off the RT shadows/sun .... should be someplace to turn off in RT Still need help Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted January 12, 2017 Share Posted January 12, 2017 You should be able to boost the ambient light level under 3D View Defaults if you have "Use Camera View Settings" checked in the Raytrace DBX, increase the "Uniform Intensity" in the Raytrace DBX and you can also boost things with the "Image Properties Settings". If things are still too dark then you could add a few 3D lights. Here's one I just Raytraced. Direct Sunlight Intensity "0", all lights turned off. Boosted Intensity & contrast in Image properties. 60 passes in 2 minutes. Graham Link to comment Share on other sites More sharing options...
jonboy Posted January 12, 2017 Author Share Posted January 12, 2017 Thanks that worked Thanks again Link to comment Share on other sites More sharing options...
TheKitchenAbode Posted January 12, 2017 Share Posted January 12, 2017 Pleased that things worked out for you. Happy Raytracing !!! Graham Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now