Hammer7

I have circles around my question spots....1. What is the extra line on this layover porch roof? The opposite side does not have it? Also when I added a railing to this porch, when I connected to the house wall the wall frame changed to a wall backer configuration but it only happened on one side? Do I have to correct the other side manually?

Thank you, that corrected a lot, now I just have to change some framing members that are showing up. I know I changed them at some point and now I'm trying to find how they were created, the deck rim joist for instance.

"Floor Above" is grayed out, next is "Ceiling: 100 1/16"

I found the framing layers, thank you, but I can't seem to move anything in the manner that I created it, I don't know if I moved it or locked it somehow and I'm trying to lower both decks for snow. The "Structure" says -6" but it's still at the same height...?

My deck is not generating in plan view but it shows up in the orthographic view? Can anyone point me in the right direction as to why this might occur?

Thank you Rob, my front steep pitches are a false overhang to mimic the appearance of a gambrel. I can make them touch but they don't want to join and the rake's are not a bisected angle.

hello everyone, happy quarentining, I'm working on bringing these roof lines together and I was wondering about how to get the rake trim to generate properly....

Thank you, that was part of it, the room was closed but the structure was turned invisible at some point. Still working on it and other things for this plan.

Hello all I'm working on a complex roof line and making steady progress. While I was adusting the railings of this deck I created I moved something, and did not notice that the deck disappeared. I've already drafted some other things that I don't want to loose and cannot figure out what is causing the deck to disappear... any thoughts? A secondary question is how to dictate wall heights by dimension? I'm trying to create a complex roof line and controlling height of certain walls will be helpful. HER.SAMP_3_30.2020.plan

Hello, Is there a catalog item that I can find a FEMA flood vent?

Why am I not able to select "Copy" I want to copy a window as I have done a thousand times before. Now my copy selection is not available in any menu....why and how do I restore it...

Thank you, I'm getting it dialed in now, MANY THANKS!

Ok, so I was able to find the handle on the actual schedule box, just no tool bar selections available yet.

Michael, My move up or down buttons are grayed out or un-selectable currently, I'm searching for the mechanism to enable them...

Let me catch up and state what my goal is. My goal is to place have my window schedule organized the way I want it organized. I wish to have the window at the bottom right side of my plan on the first floor be window number one and proceed clockwise around the building until I'm done with floor one and then proceed with the second or third floor. Is this possible in Chief? I do appreciate all the comments, I'm learning how the current set up operates. A bit confusing but little by little, brick by brick... The above sample is for a remodel with a lot going on so....more complicated than new construction. The point above is how to organize by floor and in the order that I prefer. Can this be done?

Ty Eric, is there a way to reset the window schedule to start fresh?

Yes, perhaps I'm not articulating the problem. I'm selecting a window object in plan, say w-6, I open, type in the comment and the program is not entering the comment on w-6, it is reassigning the window to w-16,17,18, or nineteen and leaving line w-6 blank... ?

Now that social distancing has set in I'm starved for attention....

I'm trying to add notes to a window schedule with the plan open....when i select a window that already has a label a new label is being created with a new number. So I was able to add comments to windows one through five, then at six the note did not populate but added a window number 17....i only had 14 window numbers to begin with... it feels like a Microsoft auto formatting feature that I don't know how it was turned on or why it is functioning the way it is...I add a note to w7 and then it shows up as window 19....Arg....why? how do we trouble shoot these issues...the CA produced videos don't seem to cover anything like this... Closed and reopened the plan and now window w-6 is gone...lol....did the corona virus take it away... BRESNAHAN-N.plan

Good morning, My design sheet is 24 x 36 and all is good but when I want to send that to print on an 11 x 17 paper is there a way to do this and have the dimensions print larger? I'm looking for video or reference set to this and I am running x 12 now.

Progress but I managed to turn off more than I would like. I'm trying to put the siding and grayscales back in order on these plans. samp LAYOUT 03132020.layout samp H 3.13.2020.zip

How does one shut off a pattern in elevation view? I'm looking to shut off the roof shingle pattern in this view and then send it to layout and have it print without roof shingles.

Thank you rgardner, I figured out that my refrigerator is on my cabinet layer when I select it but when I uncheck the cabinets the cabinets are hidden but the refrigerator remains? So ….now how do I connect it to that layer if it is disconnected?

This was a good thread for me and really helped my understand how and why the layer sets work. I'm trying to take this a step further and trying to move my appliances deselected when I hide cabinets. When I deselect cabinets they go away as planned but the appliances remain even though they are part of the cabinet bases....How do I move my appliances to another layer? I found an old video but it does not work or things have evolved from x5?