B4UBLD

Hi Jason and Dan, On X15 I'm having this issue as well (now nine months later than the original post by Jason). It may help to inform you that my billboards show up if I open the window/glass door. Thanks, Julie

W O W... Whatever it is they pay you, it's not enough. And may I please have that house???!

Unfortunately, I DON'T have different ceiling materials in the adjoining rooms. So I guess no fix for me here....

THANK YOU for submitting this question, Denzil! I had the SAME issue SUDDENLY occur. Could not for the life of me figure out what the heck to fix to get rid of "the yellow triangle with the exclamation point. SAME tray ceiling issue...BenMerritt thanks for solving the mystery. Solver--indeed "nonsense" that this occurs with recessed tray in combo with invisible wall--e.g., breakfast nook off of kitchen. FINAL View 5.bmp

That's interesting Michael; I'll post if I notice that myself.

Thank you Gene and Joe. Yes, I knew I could simply check "No room definition" on the shower wall to get the shower area included in the bath total, but I was hoping to be able to do so and NOT have to rework the materials. Lazy me! :-) Joe told me what I didn't want to hear: rework the materials. Oh well. Thanks again.

Seriously, I am not a newbie, but this is always a dumb little thing that bothers me, so I am just throwing it out there: How do you get the total automatic room measurements to include a shower that is defined by walls (so as to create and preserve its own materials)?

Michael, a very belated thanks. This project was placed on hold for a bit. However, you advice was very helpful and solved the mystery. Thanks again.

Thanks so much, Graham. Thought that might be the case; makes sense.

I'd appreciate it if someone could take a look at this old post (April 2015) and let me know the actual answer to whether or not you can set up raytraces in a queue, each with different lights turned on. In other words, set up scene 1 with certain lights on, start raytrace on that scene; set up scene 2 with different lights on, start raytrace on that scene, etc. As the original poster said, it is handy to do overnight work this way. Of course, best if one tests the raytrace(s) first by running it with a smaller image size. Thanks in advance!

Hi All, Thanks for the replies. And thanks in advance for the help. Plan attached. Made it as small as I could, but still had to put it on Dropbox: https://www.dropbox.com/s/9kfu82dp0zbbcnm/Valdez_Donahue Phase II Simplified for CA Question.zip?dl=0

Hi Eric, Yes, I want each of the driveways (there are three in total, with some space in between; not unlike what you drew) to "cut into" the curb along the road, just as you have drawn. If you still need to see the plan, just let me know. Thanks very much.

Hi All, OK, I give. No clue why I can't get my driveways to cut through the curb, creating a nice, graduated slope. Dumb mistake, I'm sure. Someone show me mercy; hurry. Please. :-)

Surely this has been brought up before, but does anyone have suggestions for creating bullnose/rounded drywall interfaces/corners? This is in extremely common use here in the Southwest and I need to incorporate this feature throughout a plan. I know that Chief does not have this capability built in. Thanks in advance for any help!

Thanks; sorry about that.

Surely this has been brought up before, but does anyone have suggestions for creating bullnose/rounded drywall interfaces/corners? This is in extremely common use here in the Southwest and I need to incorporate this feature throughout a plan. I know that Chief does not have this capability built in. Thanks in advance for any help!

Need help placing outdoor outlets on surfaces other than exterior structural walls. I gather that a similar issue has been addressed with regard to placing indoor outlets on cabinets (e.g., kitchen islands, etc.), but I do not think this is true with regard to placing waterproof GFCI outlets outdoors (e.g., on retainer walls, terrain walls, in or around outdoor kitchen areas, pergolas, etc.). However, this arises as an issue in many of my outdoor designs. Can anyone please help me out here?. Thanks very much in advance...

Jintu, how generous and kind. I must say that I've gathered that your expertise in this area is to be respected, so I appreciate your offer all the more. Speaking of your expertise, I must say that I went ahead and used the "Interior Settings by Jintu" that I saved from the Forum a while back. I believe that the result may well be the best ray trace (in this case, a 360) I've produced yet. Thanks for being such a great contributor here. And I assure you that I will be in touch soon.

Thanks, Graham. Having no recollection of having this light-bleed issue before (at least to such a significant degree) I am a bit surprised that having a roof on, as well as having a foundation in addition to a floor, makes such a difference. But the comments you make about the sunlight's properties in Chief Architect certainly make sense. If the light we all want to pour through the windows is to look at all realistic, then it makes sense that the sun would have to behave like, well, the sun. :-)

Yes, Perry, I have a roof on it. It helped quite a bit, but still some light bleed. Turned down the sun and environment light and seemed to get more improvement. When I have a chance tomorrow, I'll try to post a raytrace to show the results. Next I want to try Jintu's suggestion of adjusting Ambient Occlusion to max intensity of 4 or 5. Thanks again to all who've advised...

OH, forgot to mention what Support had to say... Essentially, they asked if I'd tried the suggestions from this thread.

Next, assuming more improvement is still needed, I will try Ambient Occlusion with a max intensity of 4 or 5, per Jintu. (Thanks, Jintu.)

Thanks for the reply, Graham. I have turned down the sun light and the environmental light to see if this helps some more. Back with results soon...

Hi All, [Edit: When I posted the comment below, I did not realize that there was a point in the thread where it digressed somewhat onto the topic of Environment Light. My comment below pertains directly to the phenomenon of light "bleed-thru," which was the topic that was introduced at the start of this thread. I just didnt wan to appear "off-topic." Thanks.] Also experiencing this issue (see first image). Contacted Support (SSA). Told me to put a roof on the plan, so I did. Helped quite a bit (see second image), but still have similar light "bleed-thru," but to a lesser degree. Let Support know this and they referred to this thread and asked if I was experiencing a phenomenon that looks similar. I confirmed and attached these same images. Now, having read this thread, I was following Jintu and totally on board and ready to go make the adjustment to Ambient Occlusion; then I saw Graham's post. Their results each look quite acceptable. So now I'm more confused regarding what to tweak. I will see what Support has to say tomorrow and report back.

Thanks to all repliers. I appreciate it. Not even SSA help desk could address this one. I will try setting the nightime ambient to zero (thanks Michael; beautiful nightime raytrace) and I will also try the "black light" (light set to color black) trick (thanks Jon; nice nighttime scene... a little scary looking! ;-)).