Greg_NY61

I been making half walls out of interior wall, making psolid cap and matching stair incline and making a railing following the stairs and making a symbol and putting everything together.

Its called Lattice Creator...and there is another one called Lattice-izer this one is good to make custom lattice, custom railing panels, etc.

Here is another one with slats on the angle.

Lattice Vertical Slats.calibz

Here is one I made a while back, 4'x8', 1 1/2" thick 1 1/2" opening. If you need I can reduce it to 3/4 thick or make you any size you want... I have a lattice plugin tool.

Lattice.calibz

Did anyone encounter this. Wall snap to the wall and they will not break away until about 3'10-3'11 away from it. Or if I make a slight adjustment to the stairs it will snap to a wall across the hallway that is 36" away from the stairs? It does that even with snaps unchecked  Did I select something in settings by mistake to cause this type of behavior?

Thanks guys, I didn't know that (never had a need to do that) I thought it can be done, mixed up with other software, I guess opening another plan like others suggested would be the way to go and switch between the two.

Put new terrain on its own layer and you can flip between them

Hi guys,

I was reading this post and I never checked this settings, been using what ever it was out of the box. So now I looked at it since Joey mentioned print sheet set up and this is my advanced options which are unchecked and it set to "mm" and I don't have anything set to metric is this normal? If not what setting should I have there and if I have to do the change someplace else like in defaults or layout?

Thanks! Appreciate the help.

You don't usually do crown that way. 99% of the time when a taller cabinet is used that cabinet will be 15" deep so the crown can die right into it. Even with inset doors, the crown will not work most of the time because the cabinet frame reveal is only 1 1/2 - 2" max .

Nice Job Dave!!! Thank you for this cool tip!!!

3D warehouse has a huge Simpson hanger collection made by Simpson manufacturer. 

If you saved the plan and you still have the plan open in CA it will not upload.

You can also create a line style with CRWN text to indicate what that is using smallest dash line settings.

Post a plan

NP Ken, enjoy! Thanks you also have a good TG!

There was a bunch of things on top of one another. This is should be fixed now if you didn't figure out by now

MORGAN_AS_BUILT.plan

Steve did you try making a manual stair select follow stairs and converting that to symbol and putting on top of the sloped wall. It's a little time consuming but works out good.

That being said, you right, stairs need total overhaul in every way possible.

If you copy one of the rafters do point to point and move to the the end of the ridge, select that rafter and swap dimensions  the depth will be 1 1/2" and width will be 9 1/4" and make adjustments.

Here is the plan

ROOF fix.plan

2 hours ago, Rosco2017 said:

What exactly did you search for? I looked for a good hour and found nothing. Must have been calling it by the wrong name or something.

I made it in Sketchup. For some reason they don't have gas valves and no other 3D site has them (have no idea why).

I made you one, I hope it will work for what you need.

Gas Valve.calibz

Here is a symbol if it helps. It can be made bigger or smaller whatever size you need.

Exterior Corner Column.calibz

I couldn't agree with you more Scott!!! I got them as well and they rock.

Post a plan

Looks good Bob,, nice design, I love the kitchen details!!!

I was messing around and made that in Sketchup real quick and imported as a symbol just to see how it will look, in CA a door opening will have to be made first and some adjustments will needed...

It was made in CA 7 version 

Custom Archway.calibz