PMMully

Members
  • Posts

    251
  • Joined

  • Last visited

Everything posted by PMMully

  1. you can see where I added a 3D polyline.
  2. I have a series of cabinets on the wall, can select molding, all good. I also have an "Arch Raised Mantle Range Hood" on the same wall (it is a copyrighted object by Jim Bishop), all good. But I need to add the same crown molding on the cabinet to the object. I can not seem to find a good way to do this. I imagine I could create a tiny cabinet above it and just have the molding show, or do customer polyline? I have seen examples in the videos of custom moldings. I really do not need to go to that extent. I know there is an easy way somewhere..... thanks in advance.
  3. I have a kitchen image that is at ~760 passes and counting at about 5:20 hours. I have seen some example shots of the RT that look absolutely amazing. This is the public stuff on the CA sites, etc. Given it is an image at the end of the day, is there any way to capture the metadata that was in place at the time in the DBX settings that were used to generate the image? I have seen this in digital cameras where there are properties captured like exposure, etc. It would be nice to be able to learn what allowed those images to be generated in such a fashion, and when the number of passes starts hitting the point of diminishing returns. The reason I ask is like everything, it sure would be nice to get a feeling of what lighting/material properties are most beneficial as the @TheKitchenAbode points out. I take it these are the "base settings". What would be common changes to those settings? @Chrisb222 thanks for posting your process. When you say "Then adjust, repeat. If something's wrong...", what adjustments are you referring to? How does the image properties compare to external tools like Photoshop? I was also able to play with the image settings on the fly, and some of them had immediate and drastic results. I did find the defaults to be the best settings for this one drawing.
  4. It is actually plan files, separate files, linked to one layout for as-built/proposed.
  5. Hi all, two questions: 1) When I create window schedules on a detail page, I selected a plan/view, and it creates the schedule just fine. However, if I have more than one plan open, I was thinking it would take the last selected plan. I had to close the other plan to get it to work right. I was thinking my selection make the one plan "active". in this case, I had an as-built plan open and a proposed plan open, I wanted to generate the schedule from the proposed plan only. This is a minor nit but I figure there is a good trick out there. If I am in the proposed plan view, it generates the right schedule but puts it onto the view. 2) Given the scenario above, the proposed plan has a mixture of existing and new windows. When I create the schedule, it puts them all on the schedule. But what I really want is just the new windows. I looked at the schedule tool section of the reference doc but saw no answers. Custom schedule?
  6. @solver Wow, a one-second fix. Yes, the camera was outside. It works the same for either cross-section view, once the camera is in the right place. The video threw me cause nothing was inside. Thanks, my friend!!!
  7. @solver here is what I am seeing, I can not see the roof planes in the cross-section like the video. The video is on the right. The title of the window in the video says cross section on it.
  8. @Joe_Carrick thanks for point that out, I got it working just fine. One last question, how do I get a cross-section elevation to show custom ceiling planes like in this video below? I looked at display settings for the cross-section but nothing is jumping out. https://www.chiefarchitect.com/videos/watch/309/drawing-vaulted-and-curved-ceilings.html?playlist=96
  9. Hi all, I have seen the kitchen remodel video that shows how to do a custom ceiling (add a vault) and that all made sense. However, in the example, it seems to pick up from core roof build based on the exterior walls as the baseline. In some simple kitchens and baths, I have been just using interior walls only (no exterior walls) as the ceiling was never required. I imagine I could make a new wall type that is labeled exterior so a roof can be generated. I had one plan recent where I had to capture an existing vaulted ceiling on a kitchen, and I could not find a way to use a customer ceiling plane to make it work. I am not seeing the best practice out there just yet. Is the best practice to make exterior walls all the time if ceilings will be an issue.
  10. I worked with another member here recently and we came up with two options: 1) Continue doing work as I am, saving PLAN files as revisions. The pros are the history, the cons are multiple files. 2) Go to the layer set approach as called out in the kitchen demo video. While I get it, it seems a bit weak for the more complex demo sets. Other ideas are welcome!
  11. Update, the reason the heap clear command is NOT work was that I did not run the command prompt in Admin mode. There was no feedback when running the command in normal mode so I had no idea. The only reason I noted it was doing additional troubleshooting like the file checker, etc. it mentioned the admin mode. Actually, my video card does have the required memory. Thanks all!
  12. This is the first I checked back since I posted. I do not believe it was me that gave the thumb down unless I accidentally clicked it. But I agree, @Kbird1 is always helpful to me. :-), keep it up brother!
  13. Hi, I followed the instructions/articles on how to clear the windows debugging heap, but after I run the commands and reboot it has no effect. Running Windows 10 with the latest patches, same with CA12. I did find my video card memory is lacking which may be the cause of my crashes in 3D, but it is not consistent.
  14. @ACADuser that is amazing stuff. Not sure why those links are not presenting themselves when I search. Maybe go back to Google search :-). But thank you great content. @Kbird1 great stuff!
  15. Looking for the best way to illustrate an insulated roof connected via ledger to a wall supported by posts (or a half wall in some circumstances). I was able to use a roof plane for a similar situation discussed recently. I noticed I have to play with the baseline/facia/ridge to get things to line up right. Some of these will have posts, others will have half walls. I was wondering if there was a library out there for aluminum structures. I either missed it or did not see one in the catalog.
  16. Hi All, Wondering what the best process is for showing demolition and changes from current to the future state? I have searched the reference and tutorial docs but have not found anything that describes the best practice other than saving file revisions. TIA = Thanks In Advance.
  17. @solver I was thinking the roof framing was already built as part of the structure. So no, I have not built the framing. I will look at the guides now. Update: Got it thank you!
  18. @solver Correct. I have the surface specified as seamed EPDM, and the structure is fir framing, with the Use Roof Ceiling Finish unchecked. I have Framing Ceiling Beams and Roof Beams. I deleted the ceiling layer as well, but all it renders is the EPDM layer and the T&G layer under it. That part looks fine. I was trying to show the roof beams for the structure, so they would follow the slope of the roof versus manually drawing roof beams
  19. @solver How do I add ceiling joists underneath? They are 24" OC going out to a main support beam with tongue/groove on top.
  20. @solver as always spot on. The manual roof plane did the trick. Thanks.
  21. Hi all, I am doing a plan for modifications to an existing structure that has a combination of a gable/hip roof (60's house in central Florida) over the core structure married to a flat roof that was custom built at one time. I need to capture the current state to show demolition and future state. The roof planes in the diagram attached are pretty close and good enough and I did that with hip/gable settings and wall breaks per the tutorial. I am struggling with how to show the existing flat roof of a slab patio, which forms the Veranda on the rear of the house. I looked at the "shed wall/gable" combo but it would not work right. I attached a pic of the floorplan and the 3D. Thanks in advance.
  22. Watching this thread it is interesting how you can control the birdsmouth cut, etc. But how many of you actually do this type of work these days, or is it simply to produce the design? Curious how you are delivering engineered truss layouts on your construction drawings. In FL, just about every truss company uses Alpine Engineering, and then the firms are superimposing the truss drawings/cad on the foundation plan for the stamp set of drawings. What is the process that is most popular?
  23. I see what happened here, many hours spent on a small topic but its burned in now. The key was only one wall showed the alignment tool, the other was aligned. So I kept looking at the wrong wall and not seeing the tool. Looked this AM, selected the other wall, and presto, it was there and functioned perfectly. @Kbird1this goes back to your post. The only thing I can not still do is set the stem wall height as described on page 118. The "room" is not selectable on Level 0, only in Level 1 (noted as a room type of Porch). But the stem wall piece is grayed out. I am sure it is me :-), so far all the documentation has been spot on. I just can't see it.