Steve_Nyhof
-
Posts
1490 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by Steve_Nyhof
-
I will definitely look into this. I always thought garage doors could use an interphase like the cabinets. Thank you, Ryan!
-
Another option with less panel layers and only using the polyline solid on the interior... https://www.loom.com/share/fc29e72e37ee488fa30e91f0cb4239b5
-
I'm leaning toward this way. I would not mull the panels anyway and suppress the label. You can still mull the windows above it and it does not effect the windows panels. The panels can be on their own layer so they do not show up on the plan Thanks to everyone for diving into this!!
-
You might have something here... Could even be a raised panel
-
Hmmm. I will look into that. Maybe if something can be created that sinks into a wall, I could create a panel that could be sized to fit under a window.
-
If it had a few more options that would work. The sill is also different for a Niche than a Window and doesn't offer the sash which creates the panel look.
-
Well, let me try a niche and see what it does... I think I have some up with a pretty nice option (above)
-
And another to fine tune this process... https://www.loom.com/share/1763931479674bf8ae2cf9d1c2a669c7
-
Here I am messing with the Sash and Frame https://www.loom.com/share/89a52ff2afc8416bbfb5649fe75bb1ff
-
I don't know that there is a real solution here... https://www.loom.com/share/acb90b94e619482db1f15ca503f22b9e
-
It might be a good option to create a fireplace!
-
So that did work just as you proposed, and it is opaque in Line Drawing, but it still has the inside to deal with which would not have the panels below the windows.
-
Got it. I think my issue was I needed space to fit the door because it comes in full size and my three windows are 6' wide. Your symbol looks just like mine so I am getting there
-
I did get a door symbol into the exterior so making some progress. I see that it needs a full opening for a large door, so need to size it first and then put the windows above it...
-
I got a Door symbol to fit into the interior wall and it is opaque
-
Nope... Maybe I need to mess with the X, Y and Z sizing?
-
Acting a bit funny, does not want to go into the wall in camera view. Going to try without brick
-
I just made it a Doorway and that is working so messing with it now
-
I'm trying it, but once it is in my library and I select it, it will not place in plan view or camera view. ??? I removed the casing, lintel and sill.
-
This is what I have... You could remove the trim and add a polyline and paint to match the wall Outside I like that you can control the sash and the frame to get different panel sizes, but a cabinet may do the trick. I like the idea of a window because it plays nice with the windows and doors.
-
Good call. But on this job I don't care about the interior. But very true for if you need the wall, then I think I will try using... I will have to give this a try Thank you gentlemen!
-
This works in several modes but not Line Drawing
-
Ah yes! Thank you! I don't mess with brick much and I figured there was something I was missing. Thank you!!
-
With a polyline solid - works, but more fussing
-
With the Line Drawing
