Steve_Nyhof
-
Posts
1490 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by Steve_Nyhof
-
Ah! Thus the "Clone". Thank you
-
I agree. My son keeps showing me gaming setups, and I keep coming back to him with, ok, thats nice, but will it speed up CA's typical CAD operations within the drawing. He does not know the answer to that. I have done some research on CAD setups, but not enough to know what I would be talking about. Chief has their recommendations and requirements, but it would be nice if Chief developers would chime into some of this and say, well, if you don't mind spending some extra dollars, we would highly recommend this because it helps with, X, Y and Z, etc.
-
I've never done this. Makes me nervous moving my operating system. For now I am thinking of reinstalling CA on the new drive and set up my paths. Leave the C: as is. I know my son wants me to move everything to the new drive so I will cross that road when they show up. I just cannot afford to be down for long.
-
Thank you. I'm assuming adding my Undo and Temp, and perhaps all of CA onto the NVME is a good start.
-
Great info. I will bookmark this thread for future upgrade advise.
-
-
Very good. Thank you Larry. I work along just fine now with only a few jobs that cause lag, and I have done very little to make my own materials so I am going to leave things as they are now and wait for some real change in hardware before I upgrade. No reason to spend money on such little gain with new things coming around the corner.
-
EDIT*: Ah! So I would need to upgrade "*to a new motherboard" anyway to support the new CPU.
-
Very interesting. While it is faster, the difference is so little, I may need to hold off for a time. Thank you!!
-
Yeah, I am having some fun, but wanting to see of I can improve what I am doing a bit. With any CAD software, once you get good at what you're doing, you can often outperform the processing... click, click, click is always nicer than... click, click, wait, click. I will need to pay closer attention as I work to notice how CA is working and then once I upgrade how it works.
-
Thank you for the info!
-
Per pcpartpicker - my motherboard can work with the Intel 11900K... see image But does require some additional items... see image I did just build this computer a little over a year ago with some upgrades since, but I would not be against putting in a new motherboard. For those who may find this thread, my son turned me onto this guy who tests and helps you find the right hardware... EDIT: I wanted to add that with my motherboard, it does support the "Intel® Core™ i9-11900K" with an update to the BIOS. Based on my study into the CPU fans I believe the one I have is already fine for this setup.
-
Good info! Thank you
-
Thank you Mick. I was thinking a new CPU may be in order. Back in the 80's I built all of our companies computers, but today I relay on my two sons and people like yourself as my interest is not what it used to be
-
This was very helpful... https://www.chiefarchitect.com/support/article/KB-00521/troubleshooting-slowness-in-chief-architect-plans.html#Work on Files Locally I would say I follow all these recommendations quite well and my speed is just fine for 95% of my work. I can experience some lag with larger houses, and then I keep my 3D off as much as I can which does speed it up. I do zoom meetings often where I use one monitor and split the screen to plan and 3D and then things slow down a bit.
-
Another question I will have, and you can see that I have 4 monitors which I love as I draw (plan view) on the bottom left, 3D floor in my bottom right, client notes, etc on the top left and my email, calendar, schedule software (Asana), G-Drive, etc, in a browser on my top right. Works very nice. My question is can 60Hz monitors slow down the performance of CA? Or better said, can a higher Hz increase performance speed with CA?
-
Hi Mick, (or anyone with knowledge of this) I am about to order the "SAMSUNG 980 PRO M.2 2280 2TB PCIe Gen 4.0 x4, NVMe 1.3c Samsung V-NAND Internal Solid State Drive (SSD) MZ-V8P2T0B/AM" - "Get read speeds up to 7,000 MB/s with 980 PRO" per Newegg.com My son is telling me I should just reinstall CA on this drive and not on the C: drive. Does this make sense to gain some speed? Most of my work is without an issue now on SSD drives. My storage drive is where I have all my plans. I never paid attention until I read this thread and see we can control where the Temp and Undo folders are located, and it hit me that CA, knowing that these files are being accessed within the operation that we can take advantage of putting these folders on a NVMe drive to speed up file transfer rates. This seems like a good move - yes? Thank you, Steve
-
Sorry I missed that. Good call
-
Ah!! Thank you very much!
-
It's a new drawing and I only have the two roof planes which were auto generated from the defaults. Set to 7.25, generated to 3.5
-
When I set the roof structure thickness to 7.25, the roofs are still generated at 3.5 https://www.loom.com/share/58d662203eb545dfb7acf75239cde336 Thoughts? Thank you, Steve
-
So I learned from support that for winders to work, you need to make the space the stairs are in a room. I did not make the basement stairs yet so did not have a room. I added a few room divider walls and it works. FYI
-
Here is the final result and DBX options on each wall... https://www.loom.com/share/6161b2bb24194744b93497344a71fb02
-
Thank you! That makes perfect sense! Perfection!!
-
Here is what I have... https://www.loom.com/share/97a8d4d7d505469ea195b3c8a7459e08 I do have some issue with my winders, they are not working and have a support ticket open. That might be my issue. I will update once I get an answer to that. Thank you, Steve
