Jambruins

when I turned on the "Walls, Layers" it worked. Thanks.

Here is a screenshot of my wall type definition screen.

I am trying to define my foundation wall with an 8" concrete wall, a 1" air gap, a 5.5" wood stud and then 1/2" gypsum. I have it defined but in my plan view it just shows the overall wall thickness. How do I get it to show a line for each wall component? A line 8" in and then two lines representing the wood stud wall?

Has anyone used magicplan and got it to work? I downloaded and played around with it at my house and I can't get a floor plan anything close to my actual measurements.

Here is my file. Thanks for the help. Buecken house.plan.

Can anyone tell me what the weird lines are by the dormer in the attached picture? How do I remove them? If I delete the auto dormer they disappear.

What is the best way to get my porch support columns/footings to be aligned with the porch newel posts? Do I have to add them manually? I know with a deck it will add the posts/footings but I can't get it to add them for a porch. If the only way is to manually add a post/footing is there a way to get the dimensions from center of newel post to center of newel post? I know I can use the tape measure but I can't snap to the newel post.

Thanks for the help. I will review the help videos before I post on here next time.

I know my plan doesn't look like the other plan. I am just asking how to get the front porch roof to be a shed type roof extending up on to the main roof. You can see in my picture my main house roof extends to the front of the porch (basically making one roof). I want the main house roof to end on the front wall of the house and then have the porch shed style roof extend up onto the house. I understand what you are saying about changing the wall/roof inputs to get the roof to change but that is what I am trying to figure out. I'm assuming I need to change my front house wall and some setting with it but I can't figure it out.

How do I get a front porch roof to be installed over the main house roof. Something like the attached picture. I know how to do it manually but is there a way to do it with auto roofs? In my drawing the front porch wall is being treated like a hip so my main roof is going from the front of the porch to the back wall instead of from the front house wall to the back wall.

Thank you for the help. I will make sure to post some pictures in the future.

When I draw a landing does it create support columns automatically or do I need to manually insert columns?

Why is my porch roof being generated with a 2'-6" overhang? I have the default set to 12". Attached is my file. Thank you. Crosley Addition.plan

thank you

I am designing a house similar to the attached picture. There will be 5' knee walls on the 2nd floor and then rafters with a 12:12 pitch. Howerver, the owner would like a full 8' tall wall height in the middle of the 2nd story (see attached picture where three windows are). Would I do this with a dormer (floating or regular dormer) or would I create a room and use an 8' wall height?

Sorry about saying it has a dormer. My original plan did have a dormer on the front but I changed it to a reverse roof. This is for a new house so we can revise things if necessary. Thanks for the help with ceiling planes and I will look at the training videos regarding truss bases. One other questions. How do you get the overhang over the door into the mudroom to extend out to match the overhang of the house roof? I know how to do it manually but is there a way to do it without turning auto roofs off?

Attached is my file. How do I remove the vaulted in the dormer? The scissor trusses will span from the back of the house to front and the dormer will be built on top of the scissor trusses so I don't want to be able to see up into the dormer from the inside. Wallenhorst House new.plan

I created a 2' out x 4' wide area in my exterior wall for a fireplace insert. When I insert the fireplace it shows up the wall above the insert is still open to the ceiling Is there a way to get the sheetrock wall to cover up the area between the top of the insert and the ceiling?

That worked. Thank you.

How do I get casing around the bay window opening? I have attached a picture of my chief architect bay window and a picture of a bay window with the casing that I am looking to add. Thanks.

How do I draw angled support beams for a porch roof? I need to create a beam where the red lines are to support the roof.

I have tried adding a wall but it doesn't work. I selected the room and in the room specifications under structure I changed the floor height to 48". If I change this back to 0" the wall gets closed but the owner does not want the wall to extend to grade. They want to frame in a landing for the stairs so there will be about 48" of room below the landing on the exterior.

How do I get the bottom of the stair landing to close? I changed the floor height of the room to 48" but then it leaves an open section into the house.

Perfect, thank you.

I have inserted windows in the gable end as the house has vaulted ceilings. There is not a 2nd floor. I have inserted some windows in the higher portion of the gable but they show up on the 1st floor plan. I need to put a door on the 1st floor plan where the windows are but the windows are in the way. I tried to put the windows on a separate layer and then turn that layer off but then it leaves a cut in the wall. Any ideas?