SNestor

SKP import is not available on Mac owing to a lack of support by the vendor of the library we use for 64 bit applications. We have contacted them about this, but they are unresponsive so we don't know if it will ever be an option. Export to COLLADA (.DAE) and use that on the Mac. It is unfortunate that this option is not available, but it is out of our control.

I use a Mac.  So...when I find an object at 3d Warehouse I wan and click download..."collada" is typically not a choice.  So...how do I get this object imported into Chief? 

I guess I don't know what you mean when you say "Export to Collada" (.dae). 

Got me.

Is the shingle texture a layer that I can control the color and line weight. I will try that.

So... The bottom line is set all line weights and color before sending to layout?

Obviously I don't know what I'm doing...yet.

So...I send an Elevation view to layout.  How do you control the weights of specific lines so for instance...the edges of the roof are bolder than say the shingle texture on the roof?  Or...the trim on the building stands out from the brick or siding veneer?

Is this something I need to setup in the plan file before I send it to layout?

I know you can edit line weights in layout...but this seems tedious to have to do an entire elevation this way. 

If there is a good tutorial on this somewhere please point me to it.

Thanks!

OK...well I'm glad I asked.   I doubt I would have done it that way.  Thanks!

Ok...I'm sure this is a simple question and I'm certain my "newb" status will be firmly cemented by this question.

When an elevation is sent to layout...is all the text that describes what is on the elevation placed on the drawing in the layout view?  Text that describes the size of the trim, roof pitch, details, floor elevation markers and dimensions.  Is all this text placed on the layout view? 

Thanks

Steve, did you trying increasing your trim Depth to something => the siding thickness?  (Sorry, I'm no help on the arch)

 

jon

Jon - the wall has brick veneer.  The trim is 2" thick.  I can see the trim if I don't mind in laying on top of the brick veneer...but, this isn't how it's built.  The trim attaches to the sheathing.  The brick abuts the trim. 

In the overhead door DBX -  when I select recess to main layer the exterior trim disappears.  I believe this is occurring on entry doors as well.  Some sort of glitch in the software I think...

I did figure out a way to create brick soldier/sill etc.  There is a decent article in the CA help files.  Still fiddling around with it...but basically once the object is created I can attach it to a molding polyline and boom...brick sill.  Not sure how to get the brick object the same color as the brick I'm using.  It's always something.

Thanks

Steve, why are you converting a polyline to a solid? Use a polyline solid directly in the elevation and the polyline solid will attach to where ever you start it, in your case, to the outside of the brick. No need to push it back to the brick. Doing this will also display the solid on the correct floor both in plan view and elevations.

Tommy...thanks for the tip.  I may have tried both methods.  The bigger problem is that it sits on the surface of the brick...which does not look realistic in 3d.  I suppose in a 2d elevation it would look ok.

How about attaching a brick arch above the trim board...in the same radius as the trim board.  I have no clue how to do that...

I'm also experiencing the garage door trim issue I've read about.  If I attach 6" trim to the overhead door...but recess the door to the main layer the 6" trim disappears behind the brick.  So, the only way to get trim along the side of the garage door is to use a polyline solid...but again it sits on top of the brick.  Not very realistic.

Can anyone explain to me how I would accomplish drawing a brick arch over a garage door (or any opening for that matter).  See the attached pdf example.

In the example...the trim over the garage door is a 2x that is arched.  The brick sill sits on top of the trim board. 

I have tried to accomplish this by using a polyline converted to a polyline solid...but if I push the object back to the wall...it disappears behind the brick veneer.  This is such a common detail (at least in Indiana it is) that there has to be a simple way of accomplishing this. 

CA is a great program but it seems simple things like attaching a brick sill to the bottom of a window or adding a simple brick soldier to a window.door opening should be a much simpler task.  I think it should be something in the window/door DBX that could be selected. 

Thanks.

Garage Door with Brick Arch Example.pdf

If I download the free version of sketchup for Mac can I open a sketchup 8 object and save it as a collada file type?

I understand I can't import sketchup files directly into a Mac...but, is there another source of 3d objects that can be imported...or a way to import a sketchup file?

Thanks

Control + Tab should do it...but it doesn't.

I'll try it again to make sure. But that didn't work for me yesterday.

If I have 2 or 3 windows open of a drawing...such as a plan view, full over view and an elevation...isn't there a keystroke that will allow me to switch between these quickly?  I know you can do it on a PC...but, can't figure out how to do it on my Mac. 

Thanks...

The brick shown above the garage door is what we call a "jack arch". Typically you have to order these custom made by your brick supplier. However...this home is actually a high end (450K) production home and as such...we tend to rely on the skill of our mason to construct these. I can tell you...they do not look like the drawing. Personally I would never use a jack arch in a home that cost less than a million dollars.

Just FYI. This drawing was created by a cad program called Vertex BD. It's a cad software that a lot of production builders use.

I use Acme Masonry Designer...

 

http://www.brick.com/architect/tools.htm

 

jon

Well...upon further inspection.  I guess you can run it on line.  Wonder if it will work on a Mac?  Probably....

Thanks for the tip.

I use Acme Masonry Designer...

 

http://www.brick.com/architect/tools.htm

 

jon

Well..."masonry designer" is a windows program - and I have a MAC, so it won't work for me. 

However...that piece of software sure does look to be quite a time saver.  Might have to pull my old PC out of the closet just to use it.

Can anyone tell me how I would create a brick soldier course as shown in the attached PDF? 

Thanks.

Brick Soldier Course Example.pdf

The suggestions are helpful to me just for learning how certain things can be accomplished....such as using the cabinet tools to create the mantle and the soffit tool to construct the hearth. However, the example is simplistic. The fireplace I am trying to model is outside the structure and has basement walls under the 3 outside chase walls...which have brick veneer.

I did not know how to create the opening for the fire place itself...use a window. Cool. I used a door opening. But, with a door opening you have to be happy with a flush hearth as the firebox will be on the floor. Using a window opening you can have a raised hearth.

Between Scott's videos, comments here in this post and the CA help I feel I did get the chimney modeled correctly...and learned a lot of tricks that could help me in the future.

Thanks. I'll be back for more I'm sure.

Brinkbart...believe me, I know the feeling!

I would love a video tutorial on how to create something like this...

Victor...thanks.  For someone new to a MAC...that's a great help!

Thanks...I'll give it a try.

Attached is the CA plan file I am trying to build the chimney chase in. Also, I've attached a PDF of the plan file I am attempting to duplicate. This plan was created with Vertex BD...a supposedly high-end cad software for production builders. It's the software used where I work.

The walls on the outside of the chase are 2x6 with brick veneer. The wall between the living area and the chase is a different wall type. I have the walls built on the first two floors...but, not sure how to build the top of the chase above the 2nd floor top plate.

I have read the comments on this thread...maybe building a 3rd floor is the answer. Have not tried yet.

Estridge Plan 1.plan.zip

Ok...so, I'm using a MAC for the first time...and of course this is the first version of CA to run on a MAC.  

Can someone explain to me what the hotkey symbols refer to?  I got the command key...but not sure what key most of the other symbols are referring to.  I keep trying combinations...but things don't work.

Maybe I should just change the keys?

Thanks.

I know this has been explained before...but, for us newbs, can someone tell us all once again how to upload a plan file.  

Thanks...

Wondering how to construct a fireplace chimney. 

According to the CA help you can use the soffit tool and apply materials to it.  However, this would not "frame"...would it?  Is it typical to construct chimneys in this manner?

I have an outside chimney chase...3 walls.  The house is 2-story on a basement.  The basement extends under the 3 outside chimney chase walls.  The chimney is brick veneer.  The chimney needs to extend above the 2nd floor top plate maybe 8'-10'.  1st floor has 10' tall walls; 2nd floor 9' tall walls.  Floor system for both floors are I-Joist...14" deep.

I have drawn the walls for the chimney on the 1st and 2nd floors...but not sure how to go from there. 

I know...I need to post the plan.  I can't do this right now...I'm at my day job.  I will try to post (if I can figure out how) - although it will probably be tomorrow. 

If there is a thread or two somewhere that will help me please let me know. 

Thanks!