gelbuilding

Mark, I zoomed in to the landings but dont see the overlapping your suggesting.

Thanks Mark, Strugging to create the stairs o/a length of 4569mm long x 3040mm high.

Hi Mark, Thank you for your help. I have a few questions regarding the stair: If the landings are aligned, will the stairs function as a single unit, with the winder overhang automatically adjusting to the stair configuration? How can I ensure the top of the stairs aligns with the top of the wall and integrates seamlessly into the room, Below, winders built in Australia.

I’m still unable to get this to work. Please look at the CAD drawings provided by the architect. They used ArchiCAD, but it seems they couldn’t properly construct the stairs and may have drawn them freehand. Stairs CA.zip

For stairs, the tread overhang can be adjusted using the style option. However, for the winders at the bottom, which I created using landings, no style option is available. All three winders are constructed from landings, and notably, the first winder connected to the main stairs has no overhang. Is there a workaround solution for removing the overhang on the landing?

I have imported a DWG file, and I noticed that the dimension value is displayed as 0.16, which corresponds to 160mm. However, I am unable to locate the settings to adjust this. I need the dimensions to be displayed as 160mm instead of 0.16

I have imported a DWG file, and when I use dimensions, the dimension arrows are not visible, and the dimension values appear scaled. I am unable to figure out how to prevent the dimension values from being scaled in the view and how to make the dimension arrows visible.

Thanks, mate it is yellow.

Dont understand why, when i change the layer colour it won`t change. This is a imported dwg drawing and one of the layers is yellow. I have changed to blue as shown below, though the layer is still yellow. Cannot find anything on the forum.

Hi Mark, Thanks for all you help. I practiced over the weekend and got it working very well.

Thanks Mark, I practise a bit and getting there slowly. Is there any control on the edit handle?

I tried a few times i dont know how you did it.

Good job Mark perfect.

Im using 15 and i have 16

Thanks for your help, How to snap to centre of circle with end to end?

I am using point to point, centre of circle to wall.

Sorry mark i forgot to close Ca, There are holes in the column left and right side and im trying to position the holes. The surveyor gave me the drawing and it was wrong, i physiclly measured each hole postion so i can get my contactor to build the structural steel to be bolted in these holes Level 2.plan

I tried on a fresh new plan from CA and works perfectly as suggested. Something with this dwg file. I have attached the file. Level 2.plan

You are correct about the edit handle they work perfectly in CA. The drawing im working on is from a dwg drawing which i imported in.

Weird, see recording, those handle you mentions come up on top with different dim line not the one im using Recording 2024-07-06 195723.mp4

See below the option you mentioned doesnt display Recording 2024-07-06 190245.mp4

Hi Mark, Yes if they come up, Dont know why doesnt default this way all the time. Cannot find a way to have this in default.

Moving Objects with dimension line. I pick the circle and after clicking on the dimension line i can change the location of the circle. Dont understand why sometimes it works and other times wont work. Am i missing some thing?

When i create the cad block and import to the library the dimensions scale up and is illegible. See below screen shot. How do i stop the dimensions scaling up when imported to the library?

Thanks Eric.