DenisonDrywall

Ok. So i cut and pasted them (which it didn't want/like to do) instead of moving them and then it worked. This is something that needs to be changed in the program. We shouldn't have to do that. thank you for the help.

I physically moved them all to start at floor level to mull them and it still wouldn't do it

Prem.zip I did all that. plan posted

It is a one story with vaulted ceiling. I moved the wall so that the top windows were not part of the attic wall (so they were all in "one" wall) it didn't make a difference. i tried moving all the windows to be at floor height so they were again, all in 'one' wall...didn't work either. does it have something to do with they are the Marvin Window blocks?

Why can I not get these units to mull together? They will mull 3 across but I can't mull the top units to the bottom units. Its not an option in the task bar to mull them together when the top units are selected with the bottom units. Thanks. Jennifer

i think i figured it out. :-)

I made this custom 3/4 french door and when I put it in the wall it makes it look like 4 panels. what setting am i not doing correctly? thanks, Jennifer

That was it! It worked! Thanks!!!!

overhead door.plan

I did draw different sections but that too does not show up. And it is set to 1 panel. I wish there was a way to have 2 different panels and then I could rearrange them in their location? I don't ever see that option show up.

I created this cutom overhead door because I can never find one with the windows in the middle that so many large commercial overhead doors have. When I made the symbol, it shows the windows in the door but when I put it into the plan, the windows disappear. What did i do wrong? I recently had made a walk door with a window and had no problems.

Thank you so much! Now if i can only figure out why its putting grass in the porch. but that's minor compared to what i was fighting. So the elevation lines can't touch each other?

Why does it keep giving me a hill here when all the elevations lines to the right of the porch are set to the same of -1'9"? If I move the elevation line right up next to the porch and elevation region, it makes it worse. I don't understand as to why its putting in extra contour lines everywhere. Thanks, Jennifer 225-0292 Olson, Steve - opt 1C.zip

I already have tried that and it didn't work

I have a storage room under a portion of the garage. I either end up with a floor at the garage level or at the basement level. It won't let each room have its own floor. structure set up for the garage room then structure set up for the basement storage. if i put in the floor for the basement at its correct floor height it does this And shows this for the garage area above its only happening in this one location. I tried to make that area of the garage its own room separate from the rest of the garage and it still does the same thing. Thanks, Jennifer

Can someone please explain as to why it is when you make a cad detail that you can't set the 'active layer set' to section view or whatever view you want? I'm very tired of making details and then finding out that all these layers on different plans are turned on and If I turn them off on the plan, they turn off on the detail. Very time consuming and frusting. Thanks, Jennifer

I just downloaded the X17 yesterday. I was unable to attend the webinar. so where are the project management files being saved at? I can't find them. I want them in a specific folder so I can find them when i need them. Thanks,

that worked. thanks.

Is there a way to make the pair of doors with each door a different size? so it looks like this But it looks wrong in elevation because i had to use 2 doors of 2 different sizes and draw a box over the jambs to hide them in plan. do i have to make a custom door somehow? Thanks, Jennifer

Thank you! That was it. Not sure how that setting was changed....

224-0496 Drautz, Kim - opt3 (3).zip Trying this again. :-)

I had thought that too, but if you look closely, the window224-0496 Drautz, Kim - opt3.zip frames protrude out into the wall. i turned on the framing and it confirmed that the drywall just disapeared. i renamed the folder so maybe that's why it wouldn't open.

The drywall on my walls disappeared. these are existing walls on their own layer. the new walls show up fine. They were showing up fine last week but when I opened the drawing today, its like this - no drywall showing. I didn't change any layers or turn any off. how do I get my drywall back? thanks, plan.zip

that worked! Thanks!

How do I make the two bottom steps curve to the wall? the curved lines are just lines drawn in. I tried the flare tool but it is not doing what I want it to do. i can't even get it to do an autowrap and miter the corner. thanks,