Sign in to follow this  
Vermillion

I need Either a Chief Architect Model Builder or Just someone to Do my Layouts

Recommended Posts

I am an Interior Designer in North Carolina and I am a wee bit overworked.  I could use someone to either take my models and build a beautiful layout or actually build the model for me.  I seem to be doing one major remodel and 1 new build per month in addition to the usual Interior Design jobs.  I prefer someon local, but I'm also fine with someone who can work from home.  

Share this post


Link to post
Share on other sites

I'm a freelance guy in the St. Louis area. I've been an autocad guy for the last 20 years and am currently migrating to Chief Architect. Would be interested in talking with you on future projects. Please email me at whiskeydixonbryon@gmail.com.

Thanks,

Bryon

Share this post


Link to post
Share on other sites

I am a long time user of Chief Architect since version 3.0. A good deal of my practice is done over the internet working with other designers, architects, and design/builders in a collaborative nature. I am in Atlanta, Ga, so depending on where you are, I may not be far away.  I'd be more than glad to discuss your needs. If you are interested please contact me. All my information is below.

 

Thanks,

Share this post


Link to post
Share on other sites

Hi There,

 

I've been using Chief products for almost 9 years now.   I'm a freelancer working from home and provide affordable services to design specialists,  home builders, and home owners throughout North America.  I'm currently looking to take on some extra projects.

 

You can have a look at my portfolio on my website at:

www.hg3d.ca

 

I would be happy to answer any questions you have.

 

Kindly

 

Dru Daigle

Designer | HG3D

dru@daigleng.com

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

  • Member Statistics

    27494
    Total Members
    6254
    Most Online
    theCADStudio
    Newest Member
    theCADStudio
    Joined
  • Similar Content

    • By nancyscial
      Hi 
      I am using x10.  I have a kitchen type that I will multiply many times and save by unit #. I need to have the unit # show up on my layout page for each plan that is saved. 
      Not sure how to save the units and have the info show up. 
      Thanks in advance! 
    • By WAShideler
      I am hoping someone can tell me how to handle this.  I have done all the framing, and using the project browser, sent all the Wall Details to a Layout page.  When I first did this, everything showed up perfect...The wall detail names on the walls in plan view, corresponding to the labels in the Layout.  
       
      Well, I made a couple of window changes, rebuilt floors and ceilings and now what I have is this: The wall detail numbers show up correctly in the plan view, but the layout shows: "Wall Layer 4 Viewed from outside".  I must be able to change the Views on the Layout to correspond with the plan view!
       
      HELP!!!!
       
      TIA 
       
      Bill
      Funky Labels.pdf
      Plan View.pdf
    • By twebbest
      looking for a chief architect draftsman in the rhode island, southern mass area.
    • By robdyck
      Does anyone have some decent ideas to keep track of details? I'm working on a large home that has over 40 details. If I decide that a particular detail, let's say it's #5, is redundant or not required, that means I've got 35 details and their callouts to renumber????? 
      I've been calling out details from the cross sections in layout, specifically so I don't have to open each section view (which is so tedious) in order to place callouts. But there's no schedule tool in layout to make any sort of auto-numbering system. And no linking system from the callout to the detail camera (I like to keep them live) or to the CAD detail (which I use for less dynamic details).
      This is as bad or worse than the issues one runs into when using room numbers.
      Surely there is some system within Chief for actual architectural plans? 
    • By Ridge_Runner
      I have struggled with this problem for some time. When I send views to Layout, I will sometimes have a difficult time "picking" a line to edit (see attached view). By hit-and-miss I am able to select it off to the left from where it shows in the view. I could never determine why or what causes it to happen until today. I have sent countless views back to layout just so I could edit them - sometimes! By chance, I discovered today, while working on a cabinet sheet of views, the problem started again. I re-sent a view, could edit the lines in place by picking them where they showed in the view. After some edits, I could not select the lines as before; they had to be selected to the left of shown. I did a mental backtrack of what I had done just before this occurred. The only thing I had done different between the functioning view and the non-functioning view was to move the view label. I like to move the labels close to the view they tag to prevent possible errors in labeling. Sure enough, if I moved the label I could no longer pick a line as normal. If I didn't move the label, I could pick the lines as normal. Would someone please try this on one of your layout sheets to see if this happens on your system? I don't think it would be a setting but I don't have a clue why it would happen. BTW, I mostly move my labels to the left if that has any bearing.
       
      Thanks, Mike