ADallas Posted July 25, 2021 Share Posted July 25, 2021 I have a model of a basic 20 x 20 garage on a slab with a hip roof. I was able to get the plate at 9' 4" by saying that's where I wanted the ceiling that I then said I didn't want. So far, so good. I can't seem to make the right set of incantations to create a loft space. The loft is framed with 2x6 at 16", plywood above, gyp. bd. ceiling below. The ceiling is 7' 4" from the ground. I used a basic interior wall to create the loft, planning to make the wall invisible later. The Loft "room" has a ceiling height of 7'4", and Roof Over This Room and Flat Ceiling Over This Room are checked. The wall's Ceiling Platform is set to Automatic. This is what happens when I uncheck "Roof Over This Room." It automatically unchecks "Flat Ceiling Over This Room." If I leave "Roof Over This Room" checked, but uncheck "Flat Ceiling Over This Room," I get a similar effect, except that the curtain above the plate line doesn't have gyp. bd. on both sides. I am able to make the wall invisible and insert a 4x6 post, but I still have the weird curtain above. My next run at this problem will be to create a second floor level with some odd wall heights. I'll post a reply if that gets somewhere. Any help from the experts would be greatly appreciated. Link to comment Share on other sites More sharing options...
Solution Kbird1 Posted July 26, 2021 Solution Share Posted July 26, 2021 The KnowledgeBase (KB) is always a good place to start , for short Tutorials on any Issue or questions you may have, even if the exact situation is not there, it may point you in the right Direction to get started..... I think this is what you are attempting in an Existing Building......... https://www.chiefarchitect.com/support/article/KB-03012/creating-a-storage-loft-in-a-larger-room.html M. 1 Link to comment Share on other sites More sharing options...
ADallas Posted July 28, 2021 Author Share Posted July 28, 2021 Actually, it turns out that I didn't want a loft--a floor level above the main floor but under the same roof. I wanted a "shelf ceiling"--a ceiling under the main room's plate line, like a plant shelf over a closet. A shelf ceiling is described here: Creating a Room with a Short Ceiling or Plant Shelf Closet Effect (chiefarchitect.com) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now