Rossalaki Posted March 1, 2019 Share Posted March 1, 2019 How can I change the box material thickness of a kitchen cabinet? The default seems to be 3/4. When I make an open face (no doors) frameless cabinet in chief. the thickness of the box is 3/4". How can I change it to 5/8" for example? Thank you! Link to comment Share on other sites More sharing options...
MarkMc Posted March 1, 2019 Share Posted March 1, 2019 No easy way to do it, even changing to framed and setting to 5/8 (I use framed 3/4 for frameless) you will still get lines at 3/4". Send in a request/report-won't be the first one. Link to comment Share on other sites More sharing options...
MarkMc Posted March 2, 2019 Share Posted March 2, 2019 15 hours ago, Rossalaki said: When I make an open face (no doors) frameless cabinet in chief. the thickness of the box is 3/4". How can I change it to 5/8" for example? OK, did this over coffee. Cabinet set to 3/4 deep, used custom cabinet doors (one for top/bottom and 1 for sides) to make the box. The sizing on the door symbols has to be locked in two of the dimensions the 5/8 and the cabinet box depth. Open included symbols to get an idea. I wouldn't normally bother with this, if I needed to show the 5/8 thickness a CAD detail would usually suffice but just in case. BTW there is a CAD detail from view taken which was pasted back (and hold position) into the elevation view so that the box could be dimensioned. 58 side cab.plan Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now