prorefinish Posted August 28, 2018 Share Posted August 28, 2018 Hi guys, I have an issue with PBR camera view. As you can see on the attached pic the reflection of the textures are missing in PBR. I know I do something wrong just can not figure out what is that. My second issue when I rendering this plan with this settings the result is dark and shady (untitled 5 renderelt 02.jpg) Thank you! Any advice are welcome! Link to comment Share on other sites More sharing options...
Cheryl_C_Crane Posted August 28, 2018 Share Posted August 28, 2018 Prorefinish: are you wanting more reflectivity or less? You are right, it's the settings and an easy fix once we give you the secret handshake. Link to comment Share on other sites More sharing options...
prorefinish Posted August 28, 2018 Author Share Posted August 28, 2018 At least some. in the setting the reflection on 100% so I would except some. But as you can see (or not because not showing) nothing showing. Link to comment Share on other sites More sharing options...
Cheryl_C_Crane Posted August 28, 2018 Share Posted August 28, 2018 Profinish, do you want a reflection? If so, do you want it to be like a mirror, a polished surface, just reflect light but not an image? Link to comment Share on other sites More sharing options...
prorefinish Posted August 28, 2018 Author Share Posted August 28, 2018 As I said I want at least some because now it is nothing as you can see on the pictures. If I setting 100% up should be like mirror or close I think. But NO REFLECTION at all. Link to comment Share on other sites More sharing options...
Cheryl_C_Crane Posted August 28, 2018 Share Posted August 28, 2018 Do you have Reflections turned on? In the last picture it looks like the lights are off, also where are the sun & windows? I made myself a tiny PBR toor bar like this one so that I can get to the appropriate settings quickly. HTH Link to comment Share on other sites More sharing options...
Kbird1 Posted August 29, 2018 Share Posted August 29, 2018 5 hours ago, Cheryl_C_Crane said: I made myself a tiny PBR toor bar OK there is the TIP for this Thread since it should really be over in the Q&A Forum It is always best to post the Plan file in cases like this , there are just too many varibles , which leads to too much guessing as to the cause... Also ...No Signature = No secret Handshake for you (J.J.) It's good to have your Forum Signature filled in, especially with the Software Version, and of course a real Name is nice too .............. See mine below in Blue for how to do that. If you don't see my Signature then you have them turned off for the Forum so you need to Toggle it on by going to the Upper RH Corner of this Forum Window and Clicking on your Username and making sure Signature are enabled (green) and then Add your Own Sig. too : UserName> Account > Signatures M. Link to comment Share on other sites More sharing options...
Kbird1 Posted August 29, 2018 Share Posted August 29, 2018 If there are no Windows and Doors to allow Light in you may need to add some raking light by adding a 3D light down near the Floor ?.... No Sunlight = no reflections or subdued Reflections in PBR Okay found Graham's post from last week , try these Settings perhaps.... Lots of good info in the Lets PBR Thread too.... but this is my post in it with the basic setup , have 100 automatic lights is important https://chieftalk.chiefarchitect.com/topic/16912-lets-pbr/?do=findComment&comment=142683 Link to comment Share on other sites More sharing options...
prorefinish Posted August 29, 2018 Author Share Posted August 29, 2018 Good morning, thank you all your help and tips. Finally I figured out I think. I played with sun lm and angle and materials. What I think some materials can not reflect as I except so I changed some of those. (but maybe I am wrong) So for this attached plan: Light settings max 20, spot light with 85Lm, sun int: 1200, tilt angle: -32.3, direction angle: 80.4, and PBR. Link to comment Share on other sites More sharing options...
Kbird1 Posted August 29, 2018 Share Posted August 29, 2018 1 hour ago, prorefinish said: Good morning, thank you all your help and tips. Finally I figured out I think. I played with sun lm and angle and materials. What I think some materials can not reflect as I except so I changed some of those. (but maybe I am wrong) So for this attached plan: Light settings max 20, spot light with 85Lm, sun int: 1200, tilt angle: -32.3, direction angle: 80.4, and PBR. Attached picture, not plan? This doesn't appear to be the kitchen you posted above yesterday...... the Windows should help greatly in PBR with the lighting..... Link to comment Share on other sites More sharing options...
prorefinish Posted August 29, 2018 Author Share Posted August 29, 2018 This is just a test kitchen. Finally I could figured out and made this pic. I am happy with this quality. But I am not a professional CA user. (yet) Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now