-
Member Statistics
-
Similar Content
-
By divreig
I imported a Import a surveyor DWG file. I followed the instruction in the tutorial (Import a Surveyor DWG file for a Site Plan or Terrain Perimeter (chiefarchitect.com) . And got some strange spikes hills. I have tired cleaning up the elevation data but no luck. There is simply no elevation data in the area that is that tall, not sure what is generate this. Pleas see the attached pic and surveyor map.
17045-Topo.pdf
17045-Topo-C.dwg
existing terrian2.plan
-
By rfantclt
Fellow More-experienced CA users,
I have drawn as-built plans of a house for a renovation/addition project in CA v.12. I recently received the final survey from the surveyor with property lines, major and minor contours, the building footprint, and other typical survey information. I imported it from .dwg as a .plan file with layers for terrain perimeter and terrain, and converted the terrain using the convert tool to make it 3D. It shows up with terrain. Yay! Now I'm not sure of the next steps:
1. How do I bring the terrain into the building.plan?
2. How do I set it in place - using a Place Point or Point Marker at a corner of the house?
3. The survey elevations are in the 650' range so how what do I do to place the terrain relative to my house (1st floor 0.0)? This house has a walk out basement, if that matters.
4. I copied in a 2D version of the survey to use in plan view (on layer CAD, AS-BUILT SURVEY). When I send it to layout, the house floor plans are obscured and the secondary contours didn't come in - admittedly, this is a previous version of my survey attempt and I've since remapped the survey layers.
I have also attached the house plan, if that helps.
Thanks for recommendations from this group, as I've watched numerous videos and couldn't find any that addressed this process.
Rebecca
CA Premier X12
Zoutewelle FINAL SURVEY.plan
Muhs Existing.plan
-
By MN_JohnH
I know this has been talked about before but I can not find it and I can't figure out how to do it again.
I have a house drawing and I have the terrain drawn and I would like to orient the house differently on the terrain. I want to keep my house drawing square with my plan so it would need to be the terrain itself that has to rotate. I can rotate the terrain perimeter but that doesn't rotate the elevation lines etc. When I select the perimeter and all the elevation lines, i am not able to rotate the whole thing.
-
By jessde
x9 intermediate skills
Can someone explain how to configure text in other than a straight line?
Thanks for any help offered.
J
-
By PinnacleChief
Good Morning! I am upgrading to x11 this week and wanted to know what to do with x10 and x9 on my desktop. Can I move these over to a zip drive and retrieve them later if I need to view an old plan that I made? I'm trying to free up some space on my computer. I haven't used x9 since I upgraded to x10, so I'm assuming that once I upgrade to x11, I won't be using x10 either. What do you guys do?
Thanks,
Jim
-