-
Posts
1060 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by jcaffee
-
-
Can never have too much objet. Thanks, Rene!
-
Thanks, Eric! I ended up drawing a rectangle around the entire shebang and aligning the top edge with the terrain perimeter line I wanted to align originally. Select rectangle on the line>Edit Area>Worked like a champ. Not sure why this didn't work using the terrain perimeter.
-
I'm having an issue in X10 using the Edit Area (All Floors) tool to rotate my site plan to a know reference line using the Make Parallel tool. I select the terrain perimeter (on the line segment I wish to align with the reference line), then select Edit Area (All Floors). I then select the Make Parallel tool, set to rotate the entire polyline, and select my reference line. Everything rotates, but a line segment of the terrain that I did not select gets the perpendicular treatment.
I know I've done this before, but for the life of me, I can't figure out what user error is involved.
See attached. (Notes in plan)
-
On 2/15/2018 at 2:35 PM, BrianBeck said:
Altering the roughness and specular values should give you the control needed to get results similar if not the same as X9.
Brian, my issue is how X10 handles reflections in RT. All materials ray trace differently vs. X6, X7, etc. I can set materials that get good reflectivity in PBR that are dull--without depth--in ray trace. As the Core Catalog materials are/were (I haven't tested all the released version yet) optimized for PBR, that means now I need to go jigger everything. AND! And, all of the manufacturer materials had settings reliant on the reflective property. Since that property no longer exists--well, my point is that something that was a known is now an unknown. I would rather have seen a new PBR materials lib instead of the reuse route.
-
On 12/19/2017 at 10:58 PM, Garreth said:
new HP Z book x2
Still the same old HP workstation. Great number crunchers and ok 2D work, but really lacking on the 3D video subsystems.
-
-
Harry, CA, by default, will add a light to any room where there is none. So, at a minimum, you'll need to add a light source to each room and then turn it off or adjust it to appear as you want. As for outside stuff, the black point light only works so far as there is a room defined (see default light above) otherwise it's sun settings. You must have either default sun or actual sun settings defined, then set it to black light color or a nighttime hour or both.
Once you get your scene sufficiently dark, then start adding light sources and fixtures set to give you the desired effect.
-
Was there ever a resolution to the watercolor-to-pdf issue. Really annoying.
-
Okey dokey Charlie, I'll give it a shot. Order submitted.
-
What filetype is output? Can we see a legible screenshot(s)?
-
-
You can always try Mootools Polygon Cruncher... http://www.mootools.com/plugins/us/3dbrowserpro/index.aspx
- 1
-
-
Use the Quoin tool
- 1
-
-
Add an exterior point light source and make the color black.
-
Jared, sorry won't be at UGM--bad heart and all that it entails. DropBox Business now requires 3 users, not 5. OneDrive library features are only available through Office365 Business with SharePoint. (SharePoint Online may be available separately, but I haven't looked into that in quite awhile.) I'm fairly sure that https://chieftalk.chiefarchitect.com/profile/75-johnny/ 's firm is successfully using SharePoint, perhaps he will chime in.
-
On 8/26/2017 at 11:11 AM, Richard_Morrison said:
I'm not sure that I would try it with any other program like OneDrive, though.
19 hours ago, jbaehmer said:File locking would not work with Dropbox or any other cloud services
Both Dropbox Business and OneDrive (via Office 365 Business and SharePoint) offer advanced file library features. Not sure about GoogleDrive, as it's been years since I've used them, but I would imagine their business service has similar offerings. That said, CA is not engineered for multi-user collaborative operations. Therefore, any efforts will always be a kludge. Backup early and often.
-
4 hours ago, glennw said:
Use a Spline Driveway and shape it to suit.
It will cut and fill the terrain in it's width.
And to expound on this; stack roadways (+|- Heights) to create a shoulder.
-
Here is a Lutron HomeWorks panel without a front cover. I haven't created a CA symbol yet as the home automation specialist deals with all this jazz (except for window automation which is another somebody else altogether different)
-
1 hour ago, glennw said:
You must have forgotten to post the plan.
-
Client pays retainer -- check
Client accepts final design -- check
Client pays balance -- check
Is there something I'm missing?
-
-
Yes, I've had this happen. Typically when CA is at the end of its useful session (right before a bunch of other stuff starts going wonky). I now view it as a canary warning of my need to reboot.
- 1
Cloud and file management
in General Q & A
Posted
I'm also a OneDrive user and the only complaint I have is CA needs to make the User Catalog a collection of separate physical files. Even with a 50/50 internet connection, my 15GB user lib can take upwards of 20 minutes to update--effectively locking the file--after I exit Chief. If I try to open CA again before the update is complete...