yusuf-333

Members
 View Profile  See their activity

  • Posts

    684

  • Joined

  • Last visited

 Content Type 

Everything posted by yusuf-333

  1. yusuf-333
  2. yusuf-333
    in your autocad work space marque select all and delete it, then click undo(crl+z) and all your curves will turn back to smooth curve. hope that helps.
  3. yusuf-333
    I am not sure, but this thread may be helpful too.
  4. yusuf-333
    Here is a video Thanks
  5. yusuf-333
    i tried it using X10. plan and pictures attached. 2way curved molding.plan
  6. yusuf-333
    Here is one way to do it. You have the sample plan attached, watch video and read the explannations in this old thread. It uses an invisible ramp running allong the sides of stairs and deck. You have full controll of all the parameters you asked once you figureout how the settings work. If you need further explannation you are welcome.
  7. yusuf-333
    Thank you sir @ShaneK
  8. yusuf-333
    As @Alaskan_Son explained in his post just model the whole system in zx plane and use it as a window. Read his explanation, it works well.
  9. yusuf-333
    Bump
  10. yusuf-333
    Hey chop thanks, but this one is too tough to go with chief. Any ways here is my take on it. I modelled it as a plane structure as you can see in the picture. Then converted it to window and applied it on curved wall to bend the whole structure. Thank you.
  11. yusuf-333
    Jarrex here is an other way to do it. convert your panel to a symbol(window) then save that window to your library. draw the curved wall and load that window, it auto curves with your wall. finally delete surfaces and again convert it to a symbol(hope that is milwork) hope that helps. custom pannel window symbol.calibz
  12. yusuf-333
    Spiral Stair Library available.
  13. yusuf-333
    Balustrade railing Spiral stair beyond 360°, No of threads=14 , angle 30°
  14. yusuf-333
  15. yusuf-333
    People are adding this symbols to their library. Download the attachment. Price is $10 PayPal directly to this email yhservices99gmail.com Modern Spiral Stair Glass Pannel Glass Thread 1.calibz
  16. yusuf-333
    Thank you Joe for the comment. Yes we have symbols both bellow and beyond the 360°. As you can see in the video for example, we have two spiral stair symbols of 30° spiral stairs. The 1st one having 11 threads is less than 360° and the 2nd one with 14 threads is beyond the 360°. Thanks again Joe.
  17. yusuf-333
    This symbols are also available here. You can get your copy for 10USD.
  18. yusuf-333
    Here is a video showing how to apply this symbol. It is made to cut floor and ceiling platform above. Thank you.
  19. yusuf-333
    Heloo every one. Here is a spiral stair synbol/model with glass railing. Price is $15USD. Paypal me link. Pay After payment completed you will have access to a shared google drive folder, so you can download the file Download Thank you in advance.
  20. yusuf-333
    Hey Steve Great you have got all the setting, I see you uploaded the dbx. You missed the other important setting to make the smooth transitions. The newel setting! Let me add a little more explanation. How does the program calculate the railing on top of different sections in a railing? I found out that it depends on the newel spacing. If the newel spacing is set to 50cm and compare it with another one with 100cm spacing, you will see the former will have smooth transitions. Therefore, if you set NS=0 and (newel width = 0) you get perfect smooth transitions. I watched your video and see you had issues with smoothness. Hope that helps.
  21. yusuf-333
    Yeah Glenn, you got it. Sorry I should wait your response but I couldn't hang the OP since we were both posting and helping him in his thread seeking for help. Any ways I was sure you'll find out. And exactly your thought was where I started to think of the problem further. I just used an open railing with top rail only. Then adjusting the width and heights accordingly. Thank you Glenn I may come back with other fun challenges in an other thread.
  22. yusuf-333
    Oh here it is, import it to your user library first. and from there you can load the railing to your stair. Solid Rail %22Follow Stair%22.calibz
  23. yusuf-333
    Hey Here is a video showing a solid railing that follows stair. Just a railing., no need for stingers nor wall adjystment. I need some one to win this challenge before I post a "railing library objext" that you can just drag from your user library and a draw as usual. As you can see in the video the bottom height and top height can be edited in a dialog box. As you can see it can be attached to the side of the stair too. Glenn will figure out easily I am sure.
  24. yusuf-333
    you can also do it using the stringers. here attached the sample plan containing it. Spir Stair solid rail.plan
  25. yusuf-333
    Yeah thank you Dermot. I didnt think of the winders. I imported the ops picture andI was just trying it using stacked landings. here are the images. thank you thank you