-
Posts
325 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by ChiefuserMathews
-
-
-
Hi, could someone check the attached plan. For some reason when I switch to Perspective framing overview, my layer set does not change with that, it stays as floor plan layer set. I spend a lot of time to figure out. Gave up. I know I can change the layer set to 3D framing layer set. But why it does not change by default. Could someone let me know where is the settings for that? Plan file attached for reference
-
8 hours ago, Kbird1 said:
It not to difficult to do you own cross section through a single board , figure out the Tilt on it and then multi-copy it up the wall every 6"
MHD_6 in Exp. Lap Siding CAD Block.calibz
M.
Thank you Mike. That was awesome
-
Thank you everyone for the valuable inputs. Let me try and will get back
-
17 minutes ago, solver said:
What "batten board" are you referring to?
as in the attached image. when I use the siding 6 wall type and take a section, I get straight line for the sidings. I need the horizontal siding. Hope this image helps
-
-
22 minutes ago, solver said:
I may have a video that addresses this -- check my YouTube channel.
Hi Eric, I could not find one. I didn't know that you had that good collections of video demonstration.
I will send you a plan, could you please show me how to fix the stair?
Thank you
-
Thank you. That's what I was looking for
-
Joey, I don't see an option to change the text size of that elevation markers
-
Hello,
how do increase the size of auto elevation marker size to a comfortable viewing size. Right now in my plan it looks so tiny. Any suggestions. Screen shot attached for reference (circled area)
-
Thank you Eric for the info. I renamed it, but didn't realize I had to replace it in the plan. It worked now as you instructed. Thank you Eric.
-
Eric, it is not a trick question. I tried to rename it, but it does not reflect in my schedule as renamed
-
I was wondering is there a way to rename a symbol so that the name appears in the schedule will be as required rather than the CA symbol name. eg. 2 way ceiling register, I want to rename it as supply air to reflect in my schedule. Is it possible? Any suggestions how i can achieve that?
-
Thank you Doug for your quick response. That is strange. But I never had any issue in the past, only on this drawing. I may have to try on creating a new plan and see if this is repeating. Anyways thank you.
-
Happy New Year
when I generate the wall legends I am getting the extra lines in my schedule and I don't know where it is coming from. Could someone look at it and let me know what is causing the extra lines to generate. Attached is my plan for reference
-
21 minutes ago, MarkMc said:
I did not watch the video so can't say as to that.
First you have the cabinet set to have a door, pullouts go into drawers. IF you did place a pullout on the door it would stay on the back of the door when the door opened and not pullout. It could be placed as a rollout in the shelf tab but this one doesn't open like a rollout when selected from the RAS library.
Second and most important-somehow your symbol has been defined as "Inserts into Counterrop". The one from the library does not so either you imported it or changed the symbol options.
So- define as drawer , then specify the drawer box
Left to right- yours, attached to back of a door, defined as rollout in shelf tab, drawer with defined as drawer box
Hi Mark, thank you very much for your detailed helpful reply. That is awesome. Much appreciated that. Let me try your steps. I know I am doing something wrong, but could not figure out. Once again thank you. Have a great day.
-
8 hours ago, solver said:
Not following the instructions
It's helpful to have a link to the video, and a time to forward to so we can see what you see.
This is the best answer I ever received. Eric, you always try to help and in the forefront, I agreed, appreciated that. But I am not an expert like you. That's why I post those silly questions. I know I am doing something wrong. If I could figure out I would not act like a fool asking those questions. Anyways thank you for your help. A detailed helping reply came from Mark. Have a great day.
-
When I try to insert the waste container into the cabinet it ends up on the top of the cabinet (file attached) what am I doing wrong? Trying to follow the latest webinar "Customizing Cabinets & What's Coming Next". Any suggestion or help?
-
thank you
-
When I create a foundation from the 1st floor, why is the stepped footing or step foundation created by default for a bay window in the 1st floor? Plan attached. I have not specified any thing to create a stepped footing.
-
10 hours ago, rgardner said:
If you see the item in any view and select it you can see the layer below.
Please note I could not select it from the plan view. If I could I would have know the layer to turn on. That was my whole issue here. Anyways I replied earlier mentioning that my issue is resolved now. thank you
- 1
-
Thank you all. Thats what I thought. But could not figure out which layer. Anyways that worked thank you.
-
Hello,
I was practicing the spiral duct work watching the Video No. 10157
(Our Spiral Ducting catalog contains molding profiles and symbols that can be used to create HVAC ducting.) For some reason I cannot see the spiral duct in my 3D view, while if I take a section I can see the duct in the section. (plan attached for reference). Could someone let me know why it is not displaying in the 3D view?
-
Thank you. That is awesome. Much appreciated. Have a great day. Stay safe
Mirror Reflection
in General Q & A
Posted
Hello, I have attached 2 images for the mirror reflection. Could someone tell me what is causing the issue? Is it my video card?