DG1949

In Plan View (2d), verify that your stairs on on the layer "Stairs & Ramps" and that Disp (display) for that layer is checked. Next, verify that you are on the floor level on which you created the stairs.  In other words, if you want the stairs to go from Level 1 to Level 2, make sure you are currently on Level 1.  They will not appear on Level 2 until you create a "Stairwell" that creates a framed opening through the ceiling.  Also, you must have a "floor" on the second level--not just the "attic".  Hope this helps!

Do you have Catalog Downloads>Doors #4 Commercial and Industrial?

Looks great!

I hope Apple® wakes up. Not going back to PC and Windows for ANY reason. 

Core Catalog>Mechanical, Electrical,Plumbing>Foundation Vents. May not be perfect, but at least a start?

37 minutes ago, CARMELHILL said:

Is it just me

It is a little awkward because they've moved stuff around. The tools and settings seem pretty much the same once you find where they've been moved to, but for me at least, it all works faster and smoother. 

31 minutes ago, Alchemyjim said:

The new version is slick!

Yes, it is. And, seems to be working faster and smoother than the 2019 version. 

Could it be done with a Frieze Profile?

What you might try is to uncheck it again and tinker with the Jamb "Depth" and "Inset" values to see if you can get what you want. 

When I load a video (Safari), I can right-click and save, so it makes me think it's not necessarily CA that's behind the issue. 

Do you have Jamb>Fit Jamb to Wall checked?

Kohler® "Veil"K-8331, from their catalog?

Wow!  Thank you Michael!

On 3/6/2020 at 4:22 PM, robdyck said:

I concur with Michael. Same material name, different folder locations. 

+1.  In the Mutual Materials® Mfg library, one is in "FaceBrick" and the other is in "Slim Brick". 

Thank you, Steve. Very helpful!

On 2/4/2020 at 12:13 AM, Kbird1 said:

 

I don't have a Mac so can't really say if it is the OS Version or ??? , just thought I'd post it up in case there are Others with the same issues. 

 

* You may also know your way around a MAC and I not sure some I helped do  

Thank you, Mick!

On 2/19/2020 at 1:30 PM, DDD123 said:

Anyone using Twinmotion for renderings?

Yes!  And it's very handy! 

On 3/2/2020 at 1:03 AM, rgardner said:

Don’t recall where I got this (pretty sure from another post). And I don’t think I actually ended up using it so I didn’t mess around with it much.  But maybe this will help?

Roll_Up_Garage_Door.calibz

Thanks, Ryan. 

The quickest way is probably to "send the dimension backward in the drawing order". In other words, the drawing order of manual dimensions is 5 by default and could be set to any order that puts the dimension "underneath" whatever you want to show instead. 

1 minute ago, TheKitchenAbode said:

 

Yes it still exists but they have changed the Icon and relocated it, took me a while to find it. It's now bundled with 2 other camera save functions in a drop down menu.

Thank you very much!

16 hours ago, TheKitchenAbode said:

editing the active camera

Does that even still exist? I searched high and low, and finally gave up looking for it. 

In the Door DBX, General, Door Style Pulldown Box, look for "louvered". The "blinds" are closed, but it achieves the effect. 

On 1/31/2020 at 2:36 PM, deaconjj said:

Has it become more difficult to do something so basic?

 Actually it's easier than ever before. In your toolbars, look for the Active Layer Set Control (Small scrollable window), usually right beside the active scale annotation window. 

I would check with your insurance agent, and have your client check with their insurance agent. 

In the Door Specification DBX, do you have the "Finished Floor to Bottom" set to 0"?