• Posts

  • Joined

  • Last visited

Everything posted by Designers_Edge

  1. Thank you for providing this link. I so appreciate it and will look at it tomorrow for sure!
  2. Honestly, I don't have time to do that right now. Not important. Will do it at my convenience and I stated what version I am using.
  3. I have searched the Chief Architect website and also here. I have X14 now and want to show sliding doors on some base cabinets. Perhaps I am missing the options to adjust this in the cabinet specifications. Would appreciate someone helping me find this. Seems like it would be available in the library with the resurgence of Mid-Century Modern. Thank you.
  4. Mick, thank you for taking the time. I actually do have a Seagate 3TB external hard drive that is set to automatically back up my data on my iMac. I am most attached to my User Library as it is precious and has taken so much time over the years, adding items that I have created in projects etc. So, would never want to lose it. Sharon
  5. Greg, you have a point. I have lots of cloud storage. I have used Chief since version 8.0 and as you can imagine, everything is getting bloated. Trying to streamline everything.
  6. I did a search on the Chief Website and also on Chief Talk and did not find anything. Trying to clean up my hard drive. All of the bonus 295 library catalog items have been added to my Library. I would like to remove all of the many files I have on my hard drive. I assume that the majority of items will be available for down load if I ever need a file or that a new and better bonus catalog will come along. I have a robust User Catalog that I work out of. Just want to make sure I am not doing something I will regret. Thank you.
  7. Here is another item I wrestle with-- do I delete the bonus Library symbol files after I have opened and installed into my library. Same with the 3D Warehouse models that I download. Of course, there are hundreds of these now. I have worried that if I delete them, would it effect my library!
  8. Larry, that has been my approach too, but I feel like there are just layers of old things that have collected over time. For instance, I never know how many previous versions of Chief I should hang onto before deleting them.
  9. 1. YES, I have read Chief Architect's X14 migration guide. But I want to dive deeper. I would love to know the way you prepare to move things over. Do you go through and clean up files? Do you move some files to an X13 folder that are no longer needed, but "just in case". What about your templates you have created for Layout? Do you clean up your library? I know we all approach this differently. I have been using Chief Architect since Chief version 8. So, have done a lot of migrations, but always feel at times it could be done more neatly, cleaner. Would love to hear your approach.
  10. I did Mark, checked the displays. I am looking forward to learning about this. It worked perfectly to copy and paste the cabinets from the work you did into my plan--for now. I want to up my knowledge and skills. Thanks again.
  11. Mark, thank you. I have been attempting this on my own and it did not work. I then opened your plan and copied it and pasted in place into my remodel plan for the client and it is not working for me. I don't expect you to attempt to teach me this and will need to look for videos and other sources on Chief to learn. I will copy and paste the cabinet though into my remodel plan. Thank you so much. Sharon
  12. Here is the basic plan for that wall of cabinets. Thank you. Chief Forum Cabinets.plan
  13. My X13 interiors is up to date-- Build: 23.4.0 1230SX and my Mac is up to date with the latest software. I have had this happen so often over the years, but have just ignored it. I have time today to attempt to solve it, but had no luck researching on Chief Architect web site or here in Chief Talk. I experience this when I do what I call a doll house view (perspective overview camera) and you see the cabinetry from above. The crown is rendered correctly in elevations and in the room camera view. Here is what I double check every time: All of the cabinets are snapped to the wall. There are no cabinets overlapping each other on the actual plan and the crown molding is my default molding that I use in the majority of my projects. The finished floor to the top is 93" on all of the cabinets. Solutions I have tried: I have made the cabinets smaller in width and then returned them to the correct width. I have used the arrow key to move them a few inches out from the wall and then back in. I have exited the camera view and then opened a new one and it is still the same issue. Is this a bug? Is there a solution? Thank you so much. Seems I have been very active lately and everyone has been so helpful with some of the issues I have had.
  14. Thank you so much for all of these tips! So appreciated
  15. Larry, I like the idea of trying a polyline solid.
  16. Mark, Where are you getting your image from?? I read about this feature, but it did not mention importing an image taken with a camera or my iPhone. Is that what you are doing.
  17. I have clients that want 3D images of a view of their backyard through their dining room and living room windows. They are removing a 2 story sun room. I have searched Chief as I remember an article about customizing and creating backdrops. What I would like to know and can’t find is the size these images should be importing them as backdrops. I have tried before and some of my attempts have been very distorted -i.e. the trees and shrubs are giant size and you just see a huge trunk out the window instead of a wooded backyard. I need the backdrop to provide a realistic view. Thank you for any advice with this.
  18. Mark, thank you so much, this is perfect. Never thought of using a door. I so appreciate this. Sharpn
  19. I am hoping that by chance, someone might know if this glass cabinet door or similar might be found in one of the catalogs. BTW, I have searched and searched to see if I could find something. Thank you
  20. I guess I do not understand how it has worked until X13 and how they would change the things needed to show materials???? I really am not ready to buy a new iMac!
  21. It is only with materials, it is not with items like fixtures, furniture etc. That is why I do not know what is going on.
  22. Has anyone else experienced the Library Preview panel being so dark, it is hard to see the example of a material. I have changed it from a panel, to a cube, to a sphere and it is all the same. If there is a control to change t his I have not been able to find it. Appreciate any help. Sharon Olsen
  23. Eric, thank you so much for helping me. I found the issue with my mouse setting after digging around some more! Thank you!
  24. Yes, I have the angle snaps on. That is just an example. But the wall is a 45 degree--just a corner. I was drawing it parallel to it--the arrow points to the line I drew.