Inside Out Walls - Editing Issue In 7?

[Elder-Designer]

I have a plan that is giving me a few issues and could use some assistance.

 

After multiple issues with Foundation and auto functions, thought I had things going well and ran into the latest twist. In the attached plan, when I edited the walls by the front door to the family room and added the windows in the upper right to the family room, I noticed a creeping issue. The walls in the upper right of the family room were flipped so the siding is now on the inside of the house. Then I noticed the kitchen wall on the right side flipped (on another redraw) and finally the top wall on the bedroom flipped.

 

So now I have siding and insulation as wall coverings...

 

Any Ideas on how I got this way and how to now solve without redrawing?

 

BTW - on CA7 - loaded it last week.

 

Do I need to go back to 6 with this plan - is 7 still a bit lacking?

 

Yes i know there are some issues with roofing planes and the safe room and the walkway to the front door but did not think they would present this issue... Had to rough those in for a client meeting.

 

Thanks Much,

Ralph

20150325COR-8+3Wall.zip

[glennw]

Ralph,

 

No need to redraw the plan.

I don't know why the wall layers would flip, but very easy to fix.

Select the wall and on the Edit toolbar, select Reverse Layers.

 

You may want to go to General Wall Defaults (Alt+Q) before reversing the walls and specify what wall layer you want the walls to reverse around.

[Elder-Designer]

Glen,

 

Was looking in the Wall Specification menus and could not find it.

 

Reread your post and then found it. And thanks for the Alt+Q - I was not familiar but that will come in handy later.

 

Also CA Suppot team responded and provided the same.

 

Thanks to both!

 

Appreciate!

 

Ralph