Gawdzira Posted January 3, 2015 Share Posted January 3, 2015 I did a quick search thinking that I was missing something and there was going to be a new and easy way to make divided lite cabinet doors. I probably spent 6 minutes searching for the info I could not find and about 5 minutes making the door in the attached file. I included the pre symbol block to examine so you can see how easy it could be to make this door a lot nicer than the simple block shapes that I used to get this one so I can get my as built drawing fairly close to what I needed. For this project the kitchen is not going to be the focus so I just wanted something to match the general look of the actual cabinet. Had this been an actual key part of the project I would have put some proper profile edges on the solids used to construct the door. The cabinet I needed this for is a 42" high upper so it is a tall door. It will resize smaller but the way it was set up the top and bottom rails will squash with the resize. Link to comment Share on other sites More sharing options...
Dennis_Gavin Posted January 4, 2015 Share Posted January 4, 2015 IF you spent an additional 20 seconds posting this email you would have actually attached the file..........;o) Link to comment Share on other sites More sharing options...
Gawdzira Posted January 4, 2015 Author Share Posted January 4, 2015 Time is so precious. Link to comment Share on other sites More sharing options...
Dennis_Gavin Posted January 4, 2015 Share Posted January 4, 2015 Thank you! Link to comment Share on other sites More sharing options...
Dennis_Gavin Posted January 5, 2015 Share Posted January 5, 2015 Alan - did you do this in X7? I get message it was done in newer version of Chief and I have X6. Link to comment Share on other sites More sharing options...
Gawdzira Posted January 6, 2015 Author Share Posted January 6, 2015 Glitch with the last version. Try this one. 8 lite cab door 42 tall.zip Link to comment Share on other sites More sharing options...
Dennis_Gavin Posted January 7, 2015 Share Posted January 7, 2015 Alan, Got the symbol. Plan has no data. Thanks. Link to comment Share on other sites More sharing options...
Gawdzira Posted January 7, 2015 Author Share Posted January 7, 2015 Amateur hour for me this week. door panel 42.zip Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now