westvale

Thanks! Do you have anyone you'd recommend?

Here's my first try at this. Here's a dropbox link: https://www.dropbox.com/scl/fi/52xdx0u55oi0eughpdzej/Pate-07-31-24.plan?rlkey=r49ggohelidtd7k54fwclwx3h&dl=0

Thanks for your suggestions! I can never post my plans because the files are too big. I checked the "Structure" of that roof plane with that edge checked and the gable fascia checkbox was unchecked - that was the ticket! Now I have a smaller issue with the shadow boards not matching. I compared most of the settings and almost everything matches. I did notice that the "Fascia Top Height" and "Shadow Boards Top Height" don't match between the two roof planes, but I can't seem to be able to fix it. If I try to adjust these to match, either the pitch goes off, of the ridge top height. I found the same sort of issue on another gable end. You would think the planes are not matching but everything looks spot on in plan. I'm going to try sharing the file via Dropbox: https://www.dropbox.com/scl/fi/52xdx0u55oi0eughpdzej/Pate-07-31-24.plan?rlkey=r49ggohelidtd7k54fwclwx3h&dl=0

Thank you for taking the time to provide a suggestion for me. I've taken a good look at the edges do appear to be at 90 degrees. I was really hoping it wasn't so I could fix it but it still doesn't have fascia. I'd post the file but it's way too big.

Hi everyone, Does anyone know how to get rid of the lines shown on these exterior walls and the lines around this tree?

Hello everyone, Does anyone know how to get a fascia on the place where it's missing in this screenshot?

Perfect! Thanks!

Hello everyone, I'm rendering this house for a visual for my clients, not for construction. How do I decrease the space between the house floor and the terrain? Visually, I want to move the terrain up.

Ok, who can tell me how to fix this lovely little catastrophe? I'd upload the file but it's too big.

I tried that and here's what I got.

Hello fellow CA users, I'm trying to replicate the mulled unit in the first image. I created a door and 3 windows. When I select all 4 items and click "create mulled unit" the warning pops up. Can anyone help me?

Does this work? I circled the areas that relate to each other.

I never seem to be able to do this because my files are always bigger than the 14 MB max file size. Is there some way around this?

I've been working on this model for some time and have not been able to figure out what this white line is here. I've looked in plan with all layers turned on and can't figure it out. Any suggestions? Close up:

I have a room divider for the shower so that I don't have baseboards in the shower. Are you suggesting a second room divider?

Hello friends, I'm trying to draw a pony wall in a shower. The pony wall was drawn as a railing in Chief with glass on top. I need the wall to come beyond the end of the shower tray, where there's a glass wall perpendicular. The pony wall needs to extend past the perpendicular wall but it keeps snapping to it. I can either have it too far past, or not enough, but it won't allow it just a couple inches past. What do I do? You can see in the image that the flange of the shower tray is poking out which I'm trying to fix.

Thank you!

Hello friends, Is there a way to have a "Straight Glass Pony Wall" not go all the way to the ceiling? I have 10' ceilings and want the glass to stop at 8'.

Hello friends, I want to create a light symbol that shows up in my schedule. I have a basic knowledge of how to create a cad block, which I did. Now I want it to show up in my automated electrical schedule.

Hello friends, I've built this as a full height cabinet with applied panels. Does anyone know if there's a way to remove these two vertical portions of the cabinet box? Or do I have to build it as a base cabinet, wall cabinet, partitions and a floating shelf?

JLU_Design thank you! I wasn't aware of this setting and it's making all the difference! I'm so grateful for your suggestion!

I've never done it before... it's telling me the file is too big. I'll share a screenshot.

Hi friends, Every time I run an interior ray trace, they're always very dark. This interior has tons of windows and light fixtures, and it's still dark! How do I fix this?

Good ideas! Thank you!

oh interesting, I wasn't aware of the "make cabinet molding polyline" tool. I'll look for that. I've also never posted a plan before, I'll try that next time I need something. I did have the partition set to have a molding but it wouldn't appear so I made a polyline molding and replaced that whole section of cabinet moldings. Time consuming. Thanks!