justmejerry

Are they legacy plans or HD plans? Could cause the issue perhaps. There is another recent post about line weights that mentions this.

If you copy the profile to your user library you should be able to get your edits.

Sent you a message Aaron.

Just un-check stagger multiple framing layers under structure tab in the walls dialogue box. You can group select all the walls at same time and do it.

John,try this in the outlets dialogue box.

Those would be "ceiling break lines" you can uncheck the layer to not display.

Nigel, can you post a cad detail you created of this system? I think maybe applying as a moulding may do the trick but not sure. The pictures on the website aren't very clear on how it goes together.

If you open preferences under new plans at the bottom it tells you where your new plans and save as plans are stored. Unless you specifically changed the directory during the save this is where it should be.

Import the PDF as a JPG image.

For a minute I thought someone forgot to send me the memo about changes lol.

Doug, in the O.B.C. 3.4.6.5 Handrails "(11) The clearance between a handrail and any surface behind it shall not be less than 50mm." 

You're welcome Mick. I'm not a fan of them. Think I used them once a couple years ago for a preliminary drawing. Easier to draw something manually.

Ed, search Atrium in the library. It will show up for you.

You're quite welcome Michael. Somebody shared them on the forums a couple years ago just reciprocating.

Look in core library under CAD Blocks or Bonus library CAD Blocks and Details

Check here Joe.

Joe mine show when i have the layer turned on for headers. Check that your doors have it checked under framing in the dialogue box.

There is definitely plenty of cad blocks and details available for X10

Steve are you referring to the fill pattern or cad details?

Doug, here are some library files if you can use them. 

HOLLOWCORE PLANK X10.calibz

Easiest way is to draw it out in a section view. Use polylines and convert to solids. Then you can block it all together or create symbol for library. 

The default beams that are part of the framing menu should show. You can set your defaults in framing for type and sizing. 

Also select your four walls and in the dbx under structure set to be default wall top height.

Might help you out...

https://3dwarehouse.sketchup.com/search/?q=milgard_windows

Perhaps Sherry @country could help you out. She is located in Saskatchewan.