Jonathan3891

Ah so that was the problem! I didn't realize a room divider would cause such an issue. Thank you for the fast resolution.

As you can see in the second and third picture there is an issue with this wall corner. The molding and brick ledge aren't connecting.

I've been struggling to figure out the issue with this wall corner all day and I'm at a loss. I would appreciate any help I can get to understand the issue and get it resolved. The file is too large to upload, but you can download it from my google drive https://drive.google.com/drive/folders/1EzUJr5P36ILRrG8Ka6yCdT_b6qOtGNXL?usp=sharing

Is it possible use frieze vents instead of soffits in Chief? Here is a detail of what it looks like. Sorry the picture is a bit blurry.

This is almost the case. I wont know the scale I want the plans at until I have the design complete and put it on a layout. Or I have to change the scale because it ends up being too crowded or whatever the case may be.

I know that CA's default scale is 1/4"=1'-0", but that scale isn't always optimal for smaller projects so I've had to create different default sets on the fly to accommodate. This gets quite tedious especially when my partner doesn't create a set for something specific and then I have to go through all the drawings and fix text, arrows, etc. I've done some extensive searching and haven't found anything that fits the bill, so I've went through and created a default set for a few different scale's to test. This is currently working for what I wanted to achieve but I'm wondering if there is a better way to accomplish that might be easier.

I'm sorry about that! NDS Plan.zip

I've rebuilt the foundation several times trying to fix this issue. NDS Plan.layout

How do I go about editing this garage stem wall width so it's as wide as the sill plate? I have the sill plate width set in the foundation defaults.

Thanks @Renerabbitt!

I'm trying to manually change this switch to a 3 way but the symbol is not updating. Is there a way to connect electrical components from one floor to another? For instance I have a light switch at both the top and bottom of the stairs.

I forgot to turn notifications on for my post. Thank everyone for info on how to accomplish this.

I'm trying to get accustom to using automatic roofs instead of doing them manually every time. I need a shed roof over the front porch and adjust the pitch so it lands a little over midway as shown below. How do I accomplish this? Thanks! New Construction.plan

Is it possible to enable or disable "include in schedule" with a button? How about enable or disable "suppress label" I've done some searching but so far I haven't found anything.

Newer versions of AutoCAD have this built in.

Uncheck the display option in the layers panel or layer display options.

Now that you've asked, I am a little interested in trying. I'm not in front of my PC with CA, but I'm sure you can export to dwg which will create an AutoCAD file with nothing but 3d solids. From there I would remove any areas that you wont be able to see, unneeded, etc. At this point you could scale your model down to fit your print bed or do it when you slice it (I think it'd be easier to do in AutoCAD). Next use the command "3D PRINT" to make the stl file. Import the stl into your slicing program and check for problem areas.

I've been pulling my hair out for a while trying to figure it out. Thank you!

I've encounted an issue and I can't figure out how to fix it. I added a covered deck to this small building. When I automatically built the roof, it added this bump out for some reason. I can fix the roof line itself no problem, but I cannot figure out how to adjust the wall so it doesnt do this. This happens on both sides of the porch. Also I need to add pier and beam foundation under the building. Does anyone know of a tutorial for this? Thanks, Jonathan 5951 N Commerce St Existing.plan

It wont allow me to set it anything below zero. I've attached a copy of the plan. Welsh - Addition.zip

How do I turn off stem walls for a carport?

I did try that several times and it didnt work, but wouldnt you believe as soon as I posted my question I was able to get it fixed.

I could of sworn I've seen this question asked, but I cannot find the post anywhere. Anyway's, I have a gap between the walls at the second floor that I cant seem to get rid of. Existing Plan.plan

That's exactly what I was looking for. Thank you all so much!

In autocad, there is a tool to space your dimensions a set distance apart, I like to space them 3/8" in paper space. Is there a way to do this in Chief Architect? Currently I'm drawing lines to space my dimenions a set distance. Is there a quicker way to do this?