Scotbow

I am interested in your position. See some of my designs at: www.bowkerhomedesign.com Regards, Scott Bowker

I have done a couple of simple homes, built on the big island. Not sure how different Maui is? See some of my designs at: www.bowkerhomedesign.com Regards, Scott

From concept, to construction documents. See examples at, www.bowkerhomedesign.com

I've used Stone slabs, (created with the 3D solids tool), as part of the exterior wall structure. However CA doesn't recognize the stone as a wall. Therefore no room definition, no floors, etc... When I try to connect between the stone slabs, using invisible walls, the invisible walls connect such that the internal layers of the existing exterior walls, are visible. Any ideas? Is there a way to make CA recognize the stone slabs, as wall sections? Thank you in advance, Scott Stonehenge.zip

Please take a look at my website, http://www.bowkerhomedesign.com , this will give you an idea of the homes I have designed. The site is a work in progress, so pardon the mess. Let me know if you have interest. I'm in Spokane county. Best regards, Scott

Please take a look at my website, http://www.bowkerhomedesign.com , this will give you an idea of the homes I have designed. The site is a work in progress, so pardon the mess. Let me know if you have interest. Best regards, Scott

Thanks for the responses. This happens on every plan. Also forgot to mention when working on a plan, if I make changes, ie; add a wall, or object, and then later decide to delete a wall or object, the program asks if I want to save this plan. No matter my response, yes or no, the program then closes. However if after I just create, or open a plan, and add a wall for example, then delete it right away, there is no issue. It's only after I have worked on several other things, that I can't go back and delete something I did much earlier. I hope I'm making sense. So if I want to make a change, I first save the plan, then reopen, and I can make any changes I desire. Very strange. BTW Ryan, no locked layers. Not sure what you mean by, "reference display item"? I have restarted the program many, many times, as you can imagine, with the program closing itself frequently.

For reasons unknown to me, I can no longer delete: Library items, or Catalogs, entire floors, of a plan. These are the things I've tried. Not sure what else. The program acts like it's going to delete, I get the warning, acknowledge it, and nothing happens. This didn't happen in X12. Any ideas why in X14? Thanks in advance, Scott

I am a freelance designer. I will design your home, or help with your workload. I work remotely. I specialize in new construction, but could also help with remodels. Examples of my design work: http://www.bowkerhomedesign.com scotbow@gmail.com

Chad, My email is scotbow@gmail.com

From concept, to construction documents. See examples at, www.bowkerhomedesign.com

I'd be happy to take a look. If you want to email me, scotbow13@hotmail.com Thanks Scott

I am a freelance designer looking to help with your workload. I work remotely. I specialize in new construction, but could also help with remodels. Check out some of my work: http://www.bowkerhomedesign.com

Here's a PDF of the front, showing the roof levels. Bow Flex - Front.pdf

I am trying to add windows, between the roof levels, (see plan), without any success. Any suggestions will be greatly appreciated. Thanks in advance, Scott Bow Flex.zip

Here's what I came up with, but boy was it a bear, and it looks worse on the inside. I built walls on the roof, cut a hole in the roof, put a roof on the walls. Messed around for an hour. There's got to be an easier way. Clerestory Windows, Above Frt Rt.pdf Clerestory Windows, Rear Left.pdf

I'm trying to put a shed dormer, on a flat roof. Chief won't allow a dormer on a low pitch roof. Anyway around this? Thanks Again, Scott

Does anyone know the correct term for the sloped soffits, similar to the attached photo? Can these type soffits be made in Chief? If so, a quick how to would be greatly appreciated. Thanks in advance, Scott

Thanks, sorry for the late reply. I've been out of town.

Hi all, I'm designing an A-Frame house. I want a bonus room over the garage, and an additional room and open area, on the second floor. (see plan) The problem I'm having is getting the upper walls to join, without protruding through the roof planes. Any instruction would be greatly appreciated. Thanks in advance, Scott PS. I can't remember if my signature block gets added automatically, so in case it doesn't I'm using X12 A-Frame.zip

I finally got it ! Thanks

I tried, but it came out as a tiny piece, on the material preview. Try as I might, I could not make fill the preview block.

Robert, Can you please explain how you did that 5x3 staggered siding. I'd like to make several different reveal patterns, like 12/6/6/12 for example. Thanks in advance. Scott

Can anyone describe how to achieve the soffit to Fascia look, per the attached photo? Sloped from thick to thin, wide to narrow Thanks, Scott

Is there a way to easily split/divide a roof plane into two planes? I've seen some earlier posts, however some of the examples posted are not available. I don't know if it's a YouTube issue, or something else. Anyway, I've tried substract polylines tool, and am apparently not using the tool properly. Any help would be appreciated. Thanks, Scott