TopagnaOverlook

XOR is a mnemonic for "Exclusive Or". It is a logical operation with the following truth table: True XOR True = False True XOR False = True False XOR True = True False XOR False = False True and False can represent On and Off. In other words, If both operands are the same, the result is off (invisible in this case). XOR in other use cases can be used to "flip" the bits in a set: True False True XOR TRUE TRUE TRUE = False True False In this case, the second argument TRUE TRUE TRUE means flip all 3 bits.

I was able to replicate your issue with an exterior pony wall but only if the upper and lower were both the same type.

Is the "missing" referenced wall on a layer that is not a member of the "Reference Display Layer Set"?

Ironically, the "find references" feature is ubiquitous in the software development tools used to develop products like Chief. :-)

The issue is that I didn't know which wall to double-click on. I was working on a plan experimenting with different exterior siding material options, combinations of different stone and stucco types, etc. and creating new wall type definitions to see how they would look. After deciding which wall type I liked best, I went to clean up my list of wall type definitions. In the "Wall Type Definitions" dialog, I use the "Delete" button at the top of the dialog to remove wall type definitions I no longer use, and see the message: "Cannot delete this wall type, it is used by one or more walls in your plan." I could not tell by the appearance in plan view, or 3D view, which wall had the wrong type, and did not want to open each wall manually to find it. Changing the fill color identified the wall I was looking for immediately. Hope that clarifies.

If your Lenovo laptop has an add-on GPU card and also has Lenovo Vantage software installed, you may discover that Preferences->Video Card Status, only shows the graphics processor onboard the CPU, not the add-on NVIDIA graphics card. The render performance may be very slow. Solution: Open Lenovo Vantage and disable "Hybrid Mode". After a reboot, you'll see the NVIDIA graphics card and your render performance will be much improved.

Go to the wall type definition you want to find and change the main layer fill color to something unique.

Thanks Doug! I'll go down that path.

This is a new construction project. Due to lot size constraints, I'd like to put a home theater in the basement underneath a 20x20 2-car garage. Structural engineering needed for the "ceiling" weight capacity, and waterproofing. I don't know how to approach this with Chief.

Thanks Glenn, Good tip. Although I wasn't monitoring the the change floor tool, I know that I didn't intentionally change it. Maybe I accidentally hit "Shift-N"...

I started over and got it to work. I cannot explain how I originally put the two solids on different levels from the elevation view, but when I did it again, they both ended up on the first floor. I'm pretty sure that what caused the "make hole" box to be disabled is that the inner solid was slightly overlapping the edge of the surrounding solid. When I re-positioned the inner solid entirely within, the checkbox became enabled.

Hi Michael, it wasn't me doing the downvote. I appreciate all the help.

Polylines are also set to display.

I cannot see either object in my plan view. CAD, Default is set to display in my working layer set. Is there another layer I need to turn on to see them?

Thanks Eric. I've moved both solids entirely away from the structure. Even though overlapped, the "Hole in Polyline Solid" checkbox for the small triangle is disabled. What should I be looking for to determine the levels or surface/depth of the two solids? Can this be done from within the elevation view?

I'm trying to make a hole in the larger with the smaller Eric.

I tried that via the "next" icon, but neither approach works in this case. I've been able to do it in other plans however.

I have two overlapped polyline solids in a cross-section elevation, and I can't seem to click-select the small triangle-shaped polyline behind the large one. (Although l can see it). Can anyone tell me the mouse clicks to do that? cross_section.plan

Thanks Eric - I'll experiment with CAD Detail from view.

Thanks Eric, Would you use that "trace" technique for something irregularly shaped? What tool would you use for the complex tracing?

Here's the result:

Thanks Joe and Eric, Creating the molding polyline in elevation view worked great. Thanks!

I'm trying to rotate a polyline molding vertically. The molding is laying flat and I want to stand it up on edge against a wall to make a frame. I can only get the rotate/transform tool to rotate it horizontally.

Thanks Mick and Michael.

This is just a cosmetic PBR issue. Notice in the PBR picture that one of the pendants shows as lit. If I open the unlit object, it's bulb turns on and the other pendant turns off. My plan file is 61MB.