rgfeher
-
Posts
65 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by rgfeher
-
-
X6 Full - asking 1200/OBO
X7 new 2695
1200 + 645 (upgrade w/ SSA) + 50 (transfer fee) = 1895
2695 (new) - 1895 = 800 (savings)
Please email Randy
rgf@mchsi.com if interested
-
With great reluctance, I must part with Chief
1500 - email or call & leave message if interested
rgf@mchsi.com
302 945 5980
Randy
-
I agree with Perry
Only way to know if it is the router or modem is to try the modem directly to see if the speed increases
Tis likely one of the two is the culprit
If both register roughly the same speeds, then the problem may be in cabling or directly from the provider
Good luck tracking this down Scott
-
Scott
Could be a router issue
To check, I'd plug the Ethernet cable directly into the modem (disconnect from the router)
Then check your speed to see if it improves
-
-
I agree with Gene
I would approach it using landings till they hit the straight run
-
Try a glass house view - maybe they will reveal themselves
-
You did check your digital locker - correct?
-
Thanks Gerry
-
Curt
Not sure if this is what you re looking for but
this is the url I use from my desktop to get straight to the forum
-
For those that use CCleaner for maintenance
Select Options/Cookies
Here you can select the sites you want to retain before the clean
-
Both pattern and texture sizes?
-
same here - got tired of replying only to see it lost who knows where
First time I've tried since then
Edit: well that worked but it was a fairly short reply whereas my last attempts had more volume
I also thought it might be a timeout type of issue
-
P,
Glad to have you back. I consider you to be a positive contributor. You have much more knowledge than I do. I know this forum is run be Chief, but GEE WIZZ.
Chief runs the forum but from my limited knowledge, it is not the creator or owner
I refer to a ticket I submitted regarding some issues I was having w/ the forum on my end
The reply was something to the effect that Cheif would have to contact the "owner" (designer?) of the forum and for me to attach capture screens of the issues
The problems were corrected without any intervention by me (or Chief that I am aware of)
- 1
-
Try enabling Aerial View in the View drop down list - should help
-
Yes, it has
Certain tasks I make sure I right click and check Run as as Aministrator - even though I am
Tis a pain, but I always check Run as Administrator when I am using system tools like regedit or cmd prompt before I open it
Even with cmd prompt - I have to make sure to get an elevated state to use
Found out somewhere down the line it was simply easier than being denied after I tried to effect a change to the OS
I still don't know if that popup is program specific or some flaw in the OS
On the other hanbd . it could be folder/file specific
Right click on the folder/properites/security and see what the permissions are
Anyway - was worth a shot
Best of luck - no doubt you will get it straighten out
Let us know when you did and what you did
R
-
Open User Accounts in the Control Panel
The account that is active will be displayed (Andy) and should display Admin
Let me know what you see when you open User Accounts and perhaps I can help
-
Andy
You my want to check the permmisions on your account
Control Panel/User accounts
Open your user account to see what rights your account has
If you have Admininstrator rights - you should not be seeing this problem
If not, then it can be changed easily enough
-
also, try right clicking on the ver 10 .EXE and select "run as admin..."
Lew
definitely worth a try
-
Ditto what Perry said about the pics
Enjoyed the one with everyone having dinner down under w/ Glenn
Have a great & relaxing time
-
I concur with Bill - very good program - good registry tool also
-
Larry
Could be permissions were changed for either the Archive folder or the Boyd Station file
Worth looking at anyway, as it apppears the auto save path is correct, but CA is confused because the write could not execute
To check the permissions - open ......X6 Data - then right click on the Archives folder
Properties-Security : All Allow permissions should be checked (with the exception of the last - Special permissions)
If not - just use the Edit button to correct
Open the Archives folder and do the same routine for the Boyd Station file
Permissions have been known (rarely) to alter so it is long shot
Good luck
-
Ron
I also see only the key for X6 in my locker, so for a test I did this
Deactivated the X6
Opened X5 - it went through the usual questions about startup options, but fired right up
Never asked for my product key
I can only assume (probably not the best word to use) that the key is stored & associated with my version of X5 on the server
Closed X5 and started X6 - it opened a dbx that listed my product key w/ the activation option -activated it and X6 started - no questions - straight to the software
Seems product keys associated to different versions should all be listed in the locker, as this is strange behavior IMO
-
I believe the OP changed the room definition to "Porch"
Could possibly make a difference if the wall were changed to invisiable
Haven't tried - Interesting though
X6 for sale - save 800 after upgrade/SSA
in Offering Services
Posted
Sold
Johnny - finances
Good luck all -- have really enjoyed it - hate to go
Take care
Randy