5FT-20Designs Posted August 12, 2014 Share Posted August 12, 2014 I am adding several offices in a large room that has a suspended ceiling. The office walls will be 8ft and open above that. Right now I have the walls defined as a pony wall with the lower wall as a Interior-4, 8ft high, and the upper has a blank wall created from air. When I create a camera view, the suspended ceiling is cut from the blank wall going to the full ceiling height. Right now I do not have a roof built so it is easy to see. I've tried a half wall (solid railing) that works except when I add a door, there is no header and the casing goes the full 8ft height. Added a soffit above the door frame does not help, the casing still goes to the top of the wall. Any help would be appreciated. Thanks, The ceiling is about 20ft high with the suspended ceiling at 12ft. Link to comment Share on other sites More sharing options...
Barton_Brown Posted August 13, 2014 Share Posted August 13, 2014 Try changing the upper wall to a wall type of 'room divider'. That is the upper wall type in the attached image. When I used a pony wall with the upper wall of 'open', I got a similar view as the one you attached. Link to comment Share on other sites More sharing options...
5FT-20Designs Posted August 14, 2014 Author Share Posted August 14, 2014 Barton, That's the cure. I knew it had to be something simple. Thanks for the help. Keith Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now