-
Posts
197 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Posts posted by English
-
-
I tried that tutorial and there is a bug in it which I submitted to tech support.
Alan
-
Dell Inspirons are in the $500 price range. Only drawback at that price point is that they tend to have on-board video cards.
Alan
-
I found that it was to much of a hassle and I could do it quicker by just drawing over the top. I just had to make sure my new walls were exactly the same width so the dimensions were the same.
Alan
-
Interesting as my builder client does the winder like GlennW posted (we are in NC).
Alan
-
Scott
I think most industries (particularly) those doing business internationally have gone metric. It's just certain home grown industries that remain on the Imperial System.
I'm too old to learn a new system -- my daughter in England tells me the temperature that day is 25C I have no idea whether that is hot or cold. I know that one meter is about the same as one yard.
Alan
-
The auto industry went metric years ago and many countries use the decimal system for their currencies. I remember in England long before they went to 100 new pennys in 1 pound we had, for coinage, a farthing (a quarter of a penny), halfpenny, penny, threepence, sixpence, shilling (twelve pence) florin (two shillings), half crown (two shillings and sixpence) and for paper money we had a ten shilling, pound (twenty shillings), and five pound notes.
Talk about trying to figure out what change you should get if you purchased something costing 3 pounds 13 shillings and sixpence halfpenny and handed over a 5 pound note.
Thank goodness the US immediately used the decimal system for our currency.
Alan
-
DWG (native ACAD format) or DXF (drawing exchange format). DWG would be the preferred format.
Alan
-
-
There is also some good ones in the Formica Decometal library.
Alan
-
I would check the scale in ACAD after they import the DXF file. I was once working with the Wrigley company who used Microstation and when I imported their DXF into ACAD the scale was always way off and I had to resize it. Not sure if this happens with a CA DXF file.
Alan
-
David
It's normal etiquette to not post in all caps.
Alan
-
Specify Label
That only changes the size in the schedule not the type of door which Marilena wanted (to the door from interior to exterior). She would need to select the door type on the first page of the door DBX.
Alan
-
I am too new to train but I hope Chief holds a training seminar there soon.
Alan
-
You do know that IRL you can't put a 1/2" diameter tube into a 1/2" diameter hole right?
Mark
That reminds me of a discussion that we had in a materials engineering class in college (many years ago). We were discussing clearance and interference fits between objects (where a 5.000" diameter shaft needs to be pressed into a 4.995" diameter hole). One of the students insisted that size on size will not go i.e. a 5.000" diameter shaft would not go into a 5.000" diameter hole without being forced.
Alan
-
Glasses are cheaper than brains.
Alan
-
I just submitted an issue to tech support regarding the Room Name and Room Area Labels getting on top of one another when the plan box was rotated on the Layout page. They suggested a workaround but also sent it to the software guys to fix. So if something doesn't do what it's supposed to do then by all means post it here but also open a tech support case.
Alan
- 1
-
I'm sure one of or more resourceful members could come up with a macro to do that in a label.
Alan
-
Thanks Michael I'll use the method you show in that screenshot.
Alan
-
-
I tried that but it changes all of the dimensions in the string to inches. I thought you said I could change just one dimension in the string to inches if the feet and inches was too large -- or am I mistaken?
Alan
-
I have always called in my orders verbally and usually use both terms to clarify. Having said that, Jere is correct. It's all about how you say it or write it. For a 2040 window...
You could SAY "twenty by forty" or "twenty forty" and screw it up or you could say "two oh four oh" and get it right. Or you could "two zero four zero", "two zero by four zero", or "two oh by four oh" and just confuse people.
You could also write it a ton of different ways...some of which could lead to confusion. In my experience the most correct way is to use superscript for the second number of each dimension (I would write it that way now but I don't know how on the forum). I beleiev 2040 is also an acceptable alternative though. Beyond that you have:
-20 40 (bad)
-20x40 (bad)
-20" x 40" (just plain wrong and very bad)
-24"x48" (correct)
-I'm sure there are plenty others.
It just needs to be communicated correctly one way or another and like I said I have always done that verbally just to be sure, and if I don't use BOTH terminologies I will usually just use inches (especially when ordering oddball sizes).
Michael
So it would be 2840
Alan
Iit's the x2 on the toolbar).
-
I have a quite old GTX285 (the only update available for my Mac Pro) and it is just fine. I would only go with the latest and greatest graphics card if I was into gaming as it is needed to maintain high frame rates which Chief doesn't need.
Alan
-
How do I upload a picture. not letting me. Also says file to big to upload in chief.
ZIP it first.
Alan
-
No problem here -- but I'm running a Mac not Windoze.
Alan
Mac vs. Windows
in General Q & A
Posted
An iMac should run Chief just fine. Make sure you specify the fastest video card. I never understood why many people said they loved their Macs and would never go back to a PC until i switched. The only reason I purchased a Windows based laptop was to run FPS shooter games as the video card on my MacPro was no longer compatible with the latest DirectX.
Dan you will not be disappointed with a Mac.
Alan