-
Posts
72 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by sea_lyons
-
Metric Plan - Convert Imperial Plan Template?
sea_lyons replied to sea_lyons's topic in General Q & A
It's not that I need to convert an existing Imperial plan to Metric. Its a small project and can easily start it over again - I've only placed a couple of cabinets/shelves thus far. What I need to do is to start with a Metric Plan Template but I was hoping that all of the settings I've changed in my Imperial Plan Template could be imported into a Metric one. -
Metric Plan - Convert Imperial Plan Template?
sea_lyons replied to sea_lyons's topic in General Q & A
Maybe I didn't do this properly. Opened a new Metric template. File>Import>Import Default Settings This is what I get -
Metric Plan - Convert Imperial Plan Template?
sea_lyons replied to sea_lyons's topic in General Q & A
Didn't know this was possible - I'll give it a shot, thank you. Interesting! I see what you mean. Off topic but when resizing doors/drawers, it will only allow you to change by increments in 1/16" but the "Front Height" can/will be in increments of 1/32". Should maybe go in the suggestions - but IMO it'd be more useful to have both of those properties be editable. Personally/as a designer, I'm more focused on the Front Height than I am on the Item Height so I'm having to edit by tiny increments to get the Front Height I want. And even then it can still be a hair off (annoying when trying to match several cabinet faces). /end rant lol -
Metric Plan - Convert Imperial Plan Template?
sea_lyons replied to sea_lyons's topic in General Q & A
Thanks Jim. I wasn't doubting Chief's conversions - just had a bit of a chuckle over it. I'm in Canada but designing something for someone based in Portugal. So I need a fully metric template for this. It's a one off so was hoping my imperial template could somehow be converted to metric to save me a ton of time on creating a metric template from scratch. All the things I've tried only get me metric dimensions on my elevations but not within the rest of the program or dialog boxes. -
Metric Plan - Convert Imperial Plan Template?
sea_lyons replied to sea_lyons's topic in General Q & A
We'll be friends again soon hopefully lol Yes, I've done that. But everything in the dialog boxes and my temporary dimensions still show up in imperial which is causing issues... I was managing until I was trying to make a shelf 50mm in thickness/height. I can enter 50mm in the DBX but that automatically changes it to 1 15/16" - which I guess is actually 49mm? So I thought I'd add 1/16" or 1/32" of an inch - but that makes it 51mm on my elevation. I won't admit how many times I went back and forth on that one haha.... Long story short - I think I definitely need to start with a metric plan... -
I've spent a fair bit of time tweaking my Imperial Template w/ text styles, sizes, colours, etc. I now have a one-off situation where I need to complete a small project in metric units. Is it possible to make copy of my imperial template and change a few settings so that it's now a metric template? Versus starting over with one of Chief's standard metric templates and changing multiple items like text styles etc? Which would be a huge time suck for such a small project... - signed an Imperial loving Canadian
-
Oh, nice! Thanks for this. My workaround doesn't work for wood finishes so I'll use your idea for that next time
-
This is how my elevation looks on the Layout file (Scale 3"-1') Here's what it looks like on the generated PDF. Lines are way too thick and you can see all the little point markers I put in (the little dots - those are at 1/16"). Is there a setting I'm missing here or is this just because of the scale?
-
Cutting Decorative Toe Kick Profile into Baseboard Molding
sea_lyons replied to sea_lyons's topic in General Q & A
Thank you! Just want to make sure I'm understanding - create only half of the profile using 3D solids and add it to the library as Millwork? Then add to the cabinet under Foot Style? I'm trying to emulate this. I can create the profile on one side (or close enough) but how do you get it to wrap around the corner? If I have to do each side separately I don't know how I'd get them to match perfectly with the curves. My skills with 3D solids are rudimentary at best lol. -
Cutting Decorative Toe Kick Profile into Baseboard Molding
sea_lyons posted a topic in General Q & A
Our cabinet maker will be cutting a decorative toe kick profile out of the baseboard molding going around an entire vanity. Similar to the image below. Is there a way to do this in Chief? Is it possible to cut shapes/profiles like this from a molding polyline or is there another way to approach this? -
I did it!!! Thanks all! I use molding lines/polylines quite a bit but didn't realize they could be used to make doors - this is way more streamlined than what I've been doing until now. So much wasted time lol...
-
I've made other cabinet door profiles with 3D Solids but those were with 90 degree edges, nothing beaded. Maybe I should have tried with countertop tools instead? Ahh this is great, thank you!!! Can I ask how you did the beaded part?
-
Is there anything similar to this door style in any of the Chief Catalogs that I'm just not finding or have not yet downloaded maybe?
-
Editing Materials on Sketchup Model in Chief?
sea_lyons replied to sea_lyons's topic in General Q & A
This is great! This will get me by until I can devote some hours to learning a new software/how to do this myself. Many many thanks!! -
Editing Materials on Sketchup Model in Chief?
sea_lyons replied to sea_lyons's topic in General Q & A
Is this what you're referring to? https://www.blender.org/ -
Editing Materials on Sketchup Model in Chief?
sea_lyons replied to sea_lyons's topic in General Q & A
The SU modeler looks like Kohler themselves lol ^Do you know how to do this? -
I've downloaded a Kohler sconce from Sketchup (this particular one isn't included in Chief's Kohler catalog). The sconce is all one material when I import it into Chief, so I'm unable to make the glass clear and fixture chrome like I need it to be. Is there a way to edit this type of issue in Chief? Or do I need to learn how to use Sketchup now too? 32253-SC02.skp
-
I know this is an old thread but I was trying to figure it out myself and found a bit of a workaround... Thought I'd leave it here in case anyone else is looking for a solution Tried the Alexandria door but as mentioned above, it looks terrible with multiple different sizes of doors/drawers. This is what I do now: Use the "Slim-Shaker" door from Cabinet Doors No. 2 Paint the center panel "Linear Narrow Glass" from Materials>Glass & Glazing>Textured Glass Blend your cabinet colour with the linear glass. Then Adjust Material Definition to remove the transparency of the glass. I've added it to some drawer fronts here - uniform through different widths:
-
This has happened to me on a few occasions - not sure if it's a glitch or something in my camera settings. Tried changing camera angles, tried a different mirror material out of the library, all to no avail. How it looks on my layout file: How it looks on the PDF: Another example: Layout file vs generated PDF
-
That option is greyed out on my dialog box.
-
That's the one I'm using.
-
Are you still having this issue or was it ever resolved? I'm experiencing the same thing with every semi-large layout file - ready to rip my hair out. Tried both suggestions above to no avail.
-
That fixed it! Thank you!