Aamir77

yep, All the walls which are thicker mean 9'' brick and thinner are 4'' brick 1/4'' Plaster in & out. Stacked stone is used for the front elevation beautification and also used inside living area just to pop up the ventilator from inside. Used the siding just because it was a default property otherwise exterior walls will just get Plaster. I know I can set my own default but siding does not bother me either. Advance thanks for the video demo.

I have also requested some samples of front elevation if you deem it good, would be a great opportunity in learning new ideas. I do have a couple of ideas which I want to share but looking for a dynamic one.

Don't remember what did I do but now I have opened your Rev1 plan in x10, it's too smooth and neat. Thank you. May I have a video demonstration on how did you fill all the roof gaps, especially of the top floor, between shed roof and walls?

Ok, I will give special attention to the exterior and interior wall next time. I tried to shift the plan to x10 but some of the imported symbols and CAD blocks which I created for false ceilings became problematic.

I think I have removed all the light fixtures yet again to err is human. Yep, I am using x9 for this plan as it was initiated long ago before I got to the X10, I do have X10 also. I did not bother going into the foundation phase for this plan because at that time I did not hire a contractor. Depending on the expertise of the contractors i thought, better leave it up to them just because of their practicality so I left it at the beginning. I love to learn proper framing and foundation but for the time being, I am a noob at it. yep, the brown boxes are just decorative. I would be obliged if anyone of you leads me to a better front elevation of the said plan. Problem faced was in the room on the 1st floor whose shed roof is passing halfway over the ceiling (pic#1). The shed roof of this room got disturbed after my indeterminate tries to fix the leaking light issue. The gap between walls and the shed roof was just like the gap on the 3rd floor before. The gap on the third floor is my second concern but that gap is not leaking any light though it needs a serious correction from outside I would thank you if learn how to correct it too. Yep, the roof plans are restricted from both left (2nd floor) and right (1st floor) just because of the presence of tall buildings both sides (Overhang should remain inside my own building). I know, I have made mistakes somewhere using interior walls as exterior but that can be corrected anytime, I might be wrong. I am going to have your reply plan downloaded, let's see. By the way, I would like to thank you one more time for your patience and time with my substandard plan, I am a hobbyist and this plan would be my first constructional experiment. I am in the building foundation phase of the said plan in real at the moment.

A rough copy of the plan I have posted above but strangely the problem of the beam of light is not showing as soon as I withdraw the symbols from this plan.

h.p gutted.zip

I will share the plan here, I have made many mistakes in the plan, I know but for the sake of demonstration to the contractor, I just need good rendering. Feels like this defect would drive me crazy as I was about to share the plan of just the structure removing all the symbols and stuff and suddenly the shade of the light vanished so I thought not to post but later when I opened the main plan removed all the stuff in the room to see whether it was good or not, the light shade came back again. On a side note, as you keenly noticed the picture, higher side the roof is not continuing along the line, I would like it to be the same I mean do not go beyond the side wall. About white gap between the rafter and the wall is an attic wall which does not touch the roof, don't know why.

An update on the issue is as soon as I was removing the symbols and fixtures of the room to make structure clear and to share with you guys the (.plan) file. The light spot vanished itself. What I felt that some material was problematic which I am still not been able to recognise. Anyway if it happens again I would be back to you on that matter. For the time being, I do have another question which is how to finish the gap encircled in Red in the picture attached.

Yes, I did not build the foundation as I felt it not necessary to me for the work I am doing. I remember just once I tried the Dropbox option to share a file long ago. Pardon me I do not get what ''gutting'' is! About compressing into a zipped file, I can try again if I am able to understand how to handle symbols I have imported into the program and all the stuff I have created like CAD blocks and other stuff.

I did not try to create a wall or a room at the Attic level. Just a simple shed roof but yes the shed roof contains half of the room. Is that possible what I am doing?

I know my wall definition might be wrong but I want it to be 4.5'' thick no matter what material it possesses. In fact, I am in a part of the world where we use this definition for all wall types. The whole plan is just for demonstration to the contractor.

A step further into the investigation I found this unwanted wall created by Chief itself. If I try to delete it, a pop-up window appears saying this

Side walls are 4.5 inches thick.

Side walls are 4.5 inches thick.

apparently, no beam of any light feels leaking under the ceiling from within the room but that white spot all along the wall on the floor looks weird

another illustration could be with cross-section elevation

Yes, the shed roof doesn't cover the whole room a bathroom wall underpasses it. I do have a BC cross-section of the shed roof which is attached herewith.

(.plan) file is over 200 Mbs, cant upload.

Hi, I am stuck with a problem while creating a shed roof. I am unable to clue this light source on the floor, looks like some gap in the roof. Help (CA x9)

thanks let me check.

Hi, Any lead on how to increase "Absolute Elevations'' and ''Relative Heights'' in a double story house??? I want to increase the ceiling height on the ground floor. Thanks in advance.

Hi How to make this kind of enclosure where a wall goes to the top of the ceiling but the understair place remains open. Urgent help will be highly appreciated,